| | Panasonic P-31MJRC 1000 Gallon Water Filter Replacement Cartridge for PJ-31MRF
| *$49.95 |
 | Panasonic Water Filter Cartridge (PJ-220R)
Brand: Panasonic Model: PJ-220R
Panasonic Water Filter Cartridge (PJ-220R) | *$14.95 |
 | Paragon Shower Hose Water Filter
Brand: Paragon Part Number: PSHF1
Shower hose filter that can be attached to any hand-held shower handle for great filtered water and keep your favorite hand held shower head. SHOWER HEAD NOT INCLUDED! Available in Chrome or Brass. Restores natural softness to skin, scalp and hair by removing harsh drying chemicals from water. Paragon Shower Hose Filter removes up to 99% of chlorine from your water, reduces hydrogen sulfide, eliminates bad taste and odor, reduces calcium and soap film build-up in your shower. Compatible with most hand held shower head models. Installs in seconds, no tools required. Filter Capacity: 5,000 gallons or 6 months. | *$31.49 |
 | Parma Trim For Thermostat Valve Polished Chrome
Brand: Globe Union Part Number: DD560158T
mfr: DANZE / GLOBE UNION AMERICA CORP. <ul class="product_features_content"> <li>Includes escutcheon, control handle and temperature selection handle assembly with temperature limit stop</li> <!-- table renders as a list of li elements. --> <li>Finish : Chrome</li> </ul><br><ul class="product_tech_info_content"> </ul> | *$159.00 |
 | Pentair Water FPWF-ORKIT t O-ring Kit Water Filter
Brand: PENTAIR WATER Model: FPWF-ORKIT Part Number: FPWF-ORKIT
"PENTAIR WATER" WATER FILTER
Packed: Carded
Replacement o-rings
Set of 3
Fits all water filters except FH1, WH2, WH3 and WH4 | *$5.99 |
 | Pentek C1-20, 20" Carbon Impregnated Cellulose Filter
Brand: Pentek Part Number: C1-20
#20 Filter, 20" Long
- C Series Offer an Economical Solution for all General-Purpose Water Filtration Needs
- Constructed of a Carbon Impregnated Cellulose
- Dual Purpose Media Filters Out Fine Sediment Particles
- Reduces Unwanted Taste, Odor and Chlorine Taste and Odor from Your Tap Water*
- Polyester Reinforcement backing and External Netting Provide Additional Strength and Dirt-Loading Capacity
- Suited for a Wide Range of Residential Applications and Make Excellent Polishing Filters When Used in Process or Closed-Loop Streams
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 1 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >5,000 Gallons @ 2gpm* (>18,900 liters @7.6 L/min)
- Max Dimensions: 2-5/8" x 20" (67mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 5 gpm (0.1 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 14 Filters per Case | *$17.75 |
 | Pentek CBC-10, 10" Carbon Block Filter
Brand: Pentex Filtration Model: CBC-10 Part Number: 155162
#10 Filter, 10" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >20,000 Gallons @ 1 gpm* (>75,700 liters @3.8 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 3.7 psi @ 1 gpm (0.26 bar @ 3.8 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$18.30 |
 | Pentek CBC-20, 20" Carbon Block Filter
Brand: Pentek
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water*
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >45,000 Gallons @ 2 gpm* (>170,300 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.0 psi @ 2 gpm (0.21 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$34.82 |
 | Pentek CBC-20BB 20" Carbon Block Water Filter
Brand: Pentek Part Number: CBC-20BB
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >150,000 Gallons @ 4 gpm* (>567,800 liters @ 15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (117mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 8.5 psi @ 4 gpm (0.59 bar @ 15.1 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$87.99 |
 | Pentek CBC-CC, 10" Carbon Block Water Filter
Brand: Ametek
#10 Filter, 10" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >50,000 Gallons @ 2 gpm* (>189,300 liters @7.6 L/min)
- Max Dimensions: 4-5/8" x 9-3/4" (117mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 4.6 psi @ 2 gpm (0.32 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$56.00 |
 | Pentek CBR2-10R, 10" Carbon Block Multi-media Filter
Brand: Pentek Model: CBR2-10R Part Number: 155403-43
CBR2-10R Carbon Block With Lead Reduction and Flow Control Filter
- #10 Filter, 10" Long
- 99.5% Reduction of Cryptosporidium, Gianrdia, Entamoeba and Toxoplasma Cysts*
- Premium High Capacity Chlorine Taste and Odor Reduction Through More than >20,000 gallons
- CBR2-10 Series are Designed to Reduce Chlorine Taste and Odor, Dissolved and Particulate Lead, Cycts and Certain Volatile Organic Chemicals (VOC)
- Built-In Flow Restrictor (0.6 gpm) to Allow for Maximum Contact Time
- Manufactured Using a Patented Process
- Combine Powdered Activated Carbon with a specially designed Adsorbent Medium for Lead and Mercury Reduction
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >20,000 Gallons @ 0.6 gpm* (>75,700 liters @2.3 L/min)
- VOC* gal @ gpm: 600 @ 0.6 (2,270 L @ 2.3 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Flow Restricted to 0.6 gpm (2.3 L/min) with built-in Flow Restrictor)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$23.32 |
 | Pentek DGD-5005, Dual Gradient Water Filter, 50/5 Micron
Brand: Pentair Model: DGD-5005 Part Number: 155357-43
DGD-5005 Dual-Gradient Polypropylene
#10 Filter, 10" Long
DGD Series are Designed for Purity
Two Separate Gradient Density Layers Enhance Filter Performance
Manufactured from 100% Pure Polypropylene
Will not Impart Taste, Odor or Color to Liquid being Filtered
Superior Chemical Resistance and is Not Prone to Bacterial Attack
Excellent for all Residential, Rural, Municipal and Commercial and Industrial Use
Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
Micron Rating: Pre-Filter - 50 Microns, Post-Filter - 5 Micron
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$15.75 |
 | Pentek ECP1-10, 10" Pleated Sediment Water Filter, 1 Micron
Brand: Pentek Part Number: ECP1-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 1 Microns (Tan Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$7.44 |
 | Pentek ECP1-20BB, 20" Pleated Cellulose/Polyester Water Filter, 1 Micron
Brand: Pentek Part Number: ECP1-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 1 Microns (Tan Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$35.40 |
 | Pentek ECP20, 10" Pleated Sediment Filter
Brand: Pentek
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 20 Microns (Blue Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$6.65 |
 | Pentek ECP20-20BB, 20" Pleated 20 Micron Water Filter
Brand: Pentek Part Number: ECP20-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 20 Microns (Blue Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP20-BB Pleated 20 Micron Water Filter
Brand: Pentek Part Number: ECP20-BB
ECP20-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 20 Microns (Blue Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.14 |
| Pentek ECP5-10, 10" Pleated Sediment Water Filter
Brand: Pentek Part Number: ECP5-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$13.67 |
| Pentek ECP5-20BB, 20" Pleated Cellulose/Polyester Water Filter, 5 Micron
Brand: Pentek Part Number: ECP5-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP50-20BB, 20" Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 50 Microns (Yellow Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP50-BB Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
ECP50-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 50 Microns (Yellow Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.14 |
 | Pentek EP-10, 10" Carbon Block Filter
Brand: Ametek Part Number: EP-10
#10 Filter, 10" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >6,000 Gallons @ 1gpm* (22,700 liters @3.8 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 1 gpm (0.23 bar @ 3.8 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$9.85 |
 | Pentek EP-20, 20" Carbon Block Filter
Brand: Pentek Part Number: EP-20
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >12,000 Gallons @ 2gpm* (45,400 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 2 gpm (0.23 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$19.75 |
 | Pentek EP-20BB, 20" Carbon Block Water Filter
Brand: Pentek Part Number: EP-20BB
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >40,000 Gallons @ 4gpm* (151,400 liters @15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (118mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 5.5 psi @ 5 gpm (0.38 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$59.92 |
 | Pentek EPM-10, 10" Carbon Block Filter
Brand: Ametek Part Number: EPM-10
#10 Filter, 10" Long
- EPM Series are a Modied Version the the "EP Series" Filter
- Economically Priced makes This Filter Suitable for Taste, Odor and Chlorine Taste and Odor Reduction
- Highest Carbon Block Dirt-Holding Capacity for Maximum Filter Life
- Manufactered Using a Patented Process and Entirely from FDQ Compliant Material
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Ideal Choice for a Wide Range of Residential, Food Service, Commercial and Industrial Applications
- Micron Rating: 10 Micron
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Chlorine Taste & Oder Reduction @ Flow Rate: >3,000 Gallons @ 1 gpm* (>11,400 liters @3.8 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1.5 psi @ 1 gpm (0.10 bar @ 3.8 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$8.37 |
| Pentek EPM-20BB, 20" Carbon Block Water Filter
Brand: Ametek Part Number: EPM-20BB
#20 Filter, 20" Long
- EPM Series are a Modied Version the the "EP Series" Filter
- Economically Priced makes This Filter Suitable for Taste, Odor and Chlorine Taste and Odor Reduction
- Highest Carbon Block Dirt-Holding Capacity for Maximum Filter Life
- Manufactered Using a Patented Process and Entirely from FDQ Compliant Material
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Ideal Choice for a Wide Range of Residential, Food Service, Commercial and Industrial Applications
- Micron Rating: 10 Micron
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Chlorine Taste & Oder Reduction @ Flow Rate: >30,000 Gallons @ 4 gpm* (>113,500 liters @15 L/min)
- Max Dimensions: 4-1/2" x 20" (118mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 4.0 psi @ 4 gpm (0.28 bar @ 15 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$61.00 |
 | Pentek EPM-BB 10" Carbon Block Water Filter
Brand: Pentek
#10 Filter, 10" Long
- EPM Series are a Modied Version the the "EP Series" Filter
- Economically Priced makes This Filter Suitable for Taste, Odor and Chlorine Taste and Odor Reduction
- Highest Carbon Block Dirt-Holding Capacity for Maximum Filter Life
- Manufactered Using a Patented Process and Entirely from FDQ Compliant Material
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Ideal Choice for a Wide Range of Residential, Food Service, Commercial and Industrial Applications
- Micron Rating: 10 Micron
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Chlorine Taste & Oder Reduction @ Flow Rate: >15,000 Gallons @ 2 gpm* (>56,750 liters @7.6 L/min)
- Max Dimensions: 4-1/2" x 9-3/4" (118mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 5.0 psi @ 2 gpm (0.35 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$33.45 |
 | Pentek NCP-10, 10" Carbon Impregnated Polyester Filter
Brand: Pentek
#10 Filter, 10" Long
- NCP Series Filters are Excellent Polishing Filters, Closed Loop Streams
- Ideal for Post Revese Osmosis and Well Water Applications
- Provides Sediment Filtration and Chlorine and Taste Reduction
- Constructed of a Carbon Impregnated Non-Cellulose Media
- Non-Cellulose Media Resists to Bacterial Attack
- Ideal for Municipal and Non-Chlorinated Water Applications
- Pleated for Maximum Dirt-Holding Capacity
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 10 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: 225 Gallons @ 1gpm* (850 liters @3.8 L/min)
- Max Dimensions: 2-1/2" x 9-3/4" (64mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 2 psi @ 3 gpm (0.1 bar @ 11 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$11.50 |
| Pentek NCP-20, 20" Carbon Impregnated Polyester Filter
Brand: Ametek Part Number: NCP-20
#20 Filter, 20" Long
- NCP Series Filters are Excellent Polishing Filters, Closed Loop Streams
- Ideal for Post Revese Osmosis and Well Water Applications
- Provides Sediment Filtration and Chlorine and Taste Reduction
- Constructed of a Carbon Impregnated Non-Cellulose Media
- Non-Cellulose Media Resists to Bacterial Attack
- Ideal for Municipal and Non-Chlorinated Water Applications
- Pleated for Maximum Dirt-Holding Capacity
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 10 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: 450 Gallons @ 2gpm* (1,700 liters @7.6 L/min)
- Max Dimensions: 2-1/2" x 20" (64mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 5 gpm (0.1 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 14 Filters per Case | *$22.57 |
| Pentek R30-20BB, 20" Pleated Reusable Water Filter, 30 Micron
Brand: Ametek Part Number: R30-20BB
#20 Filter, 20" Long
- R Series Filter Design Maximizes Dirt-Holing Capacity
- Excellent Chemical Resistance and Resists Bacteria
- Maufactured from Durable, Non-Woven and Reusable Polyester Fabric
- Ideal for Residential , Commercial and Industrial Use
- Temperature Rating: 40 °F to 155 °F (4.4 °C to 51.7 °C)
- Micron Rating: 30 Microns
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$39.90 |
| Pentek R50-BB Pleated Reusable Water Filter
Brand: Culligan Part Number: R50-BB
R30-BB Pleated Polyester - Reusable
#10 Filter, 10" Long
R Series Filter Design Maximizes Dirt-Holing Capacity
Excellent Chemical Resistance and Resists Bacteria
Maufactured from Durable, Non-Woven and Reusable Polyester Fabric
Ideal for Residential , Commercial and Industrial Use
Temperature Rating: 40 °F to 155 °F (4.4 °C to 51.7 °C)
Micron Rating: 30 Microns
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$15.69 |
 | Pentek S1-BB Pleated Cellulose Water Filter, 20 Micron
Brand: Pentek
S1-BB Pleated Cellulose
#10 Filter, 10" Long
S Series Pleated Design Maximizes Dirt-Holding Capacity
An External Netting Helps Keep Uniform Pleat Spacing in High Flow and Pulsating Flow Streams
Designed for General Water Filtration Purposes
Manufactured from a Pleated Cellulose Media
External Netting Sheath Helps Retain Uniform Pleat Spacing in High Flow and Pulsating Flow Stream
Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
Micron Rating: 20 Microns
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1.2 psi @ 10 gpm (0.08 bar @ 38 Lpm)
Recommended Flow Rate: 20 gpm (76 L/min)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$13.85 |
 | Pentek US-1500 Under Sink Water Filter System
Brand: Pentek Model: US-1500 Part Number: US-1500
The Pentek US-1500 is an under sink water filtration system and uses any of the following water filter cartridge sets: D-250, D-250A, P-250, P-250A. The Pentek US-1500 under sink filters should be replaced every 500 gallons with MTBE reduction or every 1000 gallons without MTBE reduction. The recommended water filter replacement for the Pentek US-1500 is the P-250. This filter set does not remove MTBE. To remove MTBE, purchase the P-250A. Other compatible replacement filters are the Culligan D-250 and the Culligan D-250A. | *$189.74 |
 | Pentek WP.5BB97P Wound Polypropylene Water Filter, 0.5 Micron
Brand: Pentek Part Number: WP-5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 0.5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.90 |
| Pentek WP1BB97P Wound Polypropylene Water Filter, 1 Micron
Brand: Pentek Part Number: WP1BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.29 |
 | Pentek WP5BB20P Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB20P
#20 Filter, 20" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$47.75 |
| Pentek WP5BB97P, Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.00 |
 | Pentek WPX100BB97P Wound Fibrillated Polypropylene Water Filter, 100 Micron
Brand: Pentek
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- No Need to Rise Prior to Installation if Surfactants are a Concern
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 100 Microns
- Max Dimensions: 4-1/2" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$17.68 |
 | Pentek WPX50BB97P Wound Fibrillated Polypropylene Water Filter, 50 Micron
Brand: American Plumber Part Number: 355220-43
WPX100BB97P Fibrillated Polypropylene String Wound
#10 Filter, 10" Long
Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
No Need to Rise Prior to Installation if Surfactants are a Concern
Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
Micron Rating: 100 Microns
Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$15.00 |
 | Permeate Pump for Reverse Osmosis (RO) Systems
Brand: Seisse
We provide the very best water filtration and purification products, promoting a healthier and Greener tomorrow. All products contain the very best in materials and workmanship and are backed by a 100% LIFETIME Warranty. Your Permeate Pump includes: 1 x Permeate Pump as pictured -Solid Construction - Mounts to existing cabling in your Reverse Osmosis System(mounting bracket included) - 1/4" IPS Inlet Water Line Connection. Our Permeate Pump is a simple revolutionary device, requiring NO electricity and simply powered by the hydraulic energy of brine water usually lost to the drain. The Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. The RO- membrane always sees the full pressure across the membrane even if the tank is almost up to the same pressure. This way the system does not lose its performance. Systems Using the Permeate Pump Technology Don't Show Negative Changes In the System Recovery Rate. These pumps dramatically improve the efficiency of R.O. water production; Fills product tank up to 4 times more rapidly, while reducing waste-water by up to 80% -- Improves recovery rates by as much as 400% -- Increases contaminant rejection -- Ideal for membranes rated up to 100 GPD - Effective for inlet water pressure as low as 25 psi -- Increases membrane life, lowers TDS creep -- Increased water pressure ensures a REDUCTION in TDS count. | *$53.39 |
 | PETRA 40958253010 10-Inch Carded plus Scale Ice Maker Water Filter
Brand: Petra Model: 40958253010 Part Number: 4.095825301e+012
 10" Filter Odor/Taste/Scale; Contains Carbon For Taste & Odor Removal | *$9.88 |
 | Pitcher Filter
Brand: Culligan Part Number: PIT-1
Fits in doors of most refrigerators for convenience. Uses an easy-to-install bacteriostatic filter that provides 40-gallon/2-month life depending on usage and water quality. 2-stage filtration inhibits bacterial growth in filter media and provides clean,fresh drinking water by reducing lead, chlorine taste and odor, copper, mercury, zinc, sediment, bad taste and odor. Date reminder on lid helps keeping up with filter changes. Includes clear pitcher, clear filter reservoir, No.P1-R 40-gallon filter, whitelid with blue filter replacement indicator, use and care manual. | *$9.99 |
 | Pitcher Filter Replacement Cartridge
Brand: Culligan Model: WP-1R, FIT PICHER WP-1
Clearly Better!!
Fits Picher WP-1 | *$3.23 |
 | Plumb Pak Icemaker Installation Kit PP855-20
Brand: Plumb Pak Part Number: PP855-20
Includes: 25' poly tubing. All necessary fittings. Shut off valve and saddle valve. | *$7.55 |
 | Plump Chef Collection Hand-painted Water Jar
Brand: ecWorld
This beautiful top-of-the-line Water Jug is part of the Plump Chef Collection - it's dishwasher safe, and is both handcrafted and hand-painted to perfection! MSRP $115 | *$59.99 |
 | Poly Spun Filter, 10M
Brand: Sta-Rite Model: RS14 Part Number: RS14-SS24-05
Reduces dirt and sand sediment and rust particles from your water. 10 Micron Rating | *$1.36 |
 | Pool/Spa Filter Cartridge Pleatco PAS35-2 Replaces Unicel 7CH-322/Filbur FC-0420/Artesian Top Load Spa (Coleman)
Brand: Pleatco Model: PAS35-2 Part Number: PAS35-2
Pleatco replacement swimming pool/spa pool filter cartridge # PAS35-2 replaces Unicel 7CH-322, Filbur FC-0420, and Artesian Top Load Spa (Coleman) swimming pool/spa filter cartridges. Pleatco premium filter cartridges employ Free Flow Cores, specifically engineered to allow for the even flow of water through the entire cartridge which increases filtration (best efficiency), uses greater media surface to inhibit the growth of bacteria mold & algae (best water quality), and makes it easier for the pump to pull more water through the cartridge (less wear & tear and expense). | *$23.05 |
 | Pool/Spa Filter Cartridge Pleatco PWW10 Replaces Unicel C-4310/Filbur FC-3077/Waterway Skim Filter 10
Brand: Pleatco Part Number: PWW10
Pleatco replacement swimming pool/spa pool filter cartridge # PWW10 replaces Unicel C-4310, Filbur FC-3077, and Waterway Skim Filter 10 swimming pool/spa filter cartridges. Pleatco premium filter cartridges employ Free Flow Cores, specifically engineered to allow for the even flow of water through the entire cartridge which increases filtration (best efficiency), uses greater media surface to inhibit the growth of bacteria mold & algae (best water quality), and makes it easier for the pump to pull more water through the cartridge (less wear & tear and expense). | *$9.99 |
 | Porcelain Water Dispenser Blue Stripe with Wooden Stand
Brand: Coldkeepers
WHAT A BEAUTIFUL WAY TO SERVE WATER or ANY FAVORITE BEVERAGE! This is a lovely large white porcelain crock for dispensing water (or any of your favorite beverages). The entire crock is white with two blue stripes. The crock is 100% lead free vitrified porcelain. It measures 10 inches in height with a 10 inch bottom diameter. The crock has a 2-3 gallon water reservoir and will easily support a 5 gallon water bottle. This is a lovely crock that would look wonderful on anyone's kitchen or in the den. It could also be used in a bedroom or bathroom for those necessary midnight drinks. The stand is made of 3/4 in hard wood and as you can see in the picture, it will look nice in any setting. Also a wonderful way to serve tea or lemonade at your next social gathering. This crock does not come with a lid or a plastic rim. | *$89.95 |
 | Porcelain Water Dispenser Southwestern Style with Wooden Stand
Brand: S. | *$99.99 |
|
