 | Duo-Fast 5418D 9/16-Inch by 20 Gauge 3/16 Crown Gold Staple (5,000 per Box)
Brand: Duo-Fast Model: 5418D Part Number: 5418D
For use with Duo-Fast ENC5418 Electric Stapler, Zinc plating to protect against rust, Divergent Point. | *$3.75 |
 | Duo-fast Electric Stapler
Brand: Duo-Fast Model: CarpetPro Part Number: 1016055
With it's durable nickel-plated magazine that will not collect lint or dirt and longer nose for heavy nap carpet you could not ask for anything better. It has a 14 AWG cord for more power as well as the cord is more flexible for cold weather use. It has more height to is now that allows you to get under stairs easily. | *$138.95 |
 | DuraPro 06-141 PalmPro 6.0-Volt Ni-Cad Cordless Screwdriver
Brand: DuraPro Model: 06-141 | *$22.29 |
 | DuroMax XP650WP 3-Inch Intake 7 HP OHV 4-Cycle 220-Gallon-Per-Minute Gas-Powered Portable Water Pump (CARB Compliant)
Brand: DuroMax Model: XP650WP Part Number: XP650WP
Features: Water Pump 3 Intake and Outlet with back flow check valve Durable 6.5 Horse Power Engine (EPA and CARB Approved) 220 Gallons per minute Pump overhead lift: 91 Suction height: 26 2.4 Hour run time per tank Low oil shut off sensor Construction Material: Steel Frame | *$249.99 |
| DuroMax XP652WP 2-Inch Intake 7 HP OHV 4-Cycle 158-Gallon-Per-Minute Gas-Powered Portable Water Pump (CARB Compliant)
Brand: DuroMax Model: XP652WP Part Number: XP652WP
Move Huge Volumes of Water with this Smooth Running, Easy Starting, Long Lasting Pump Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach more uses. This PowerMax 2" water pump has a Real 2" NPT fitting so you can use your regular hoses on it. Our competitors on eBay do not have the 2" NPT thread, but have metric instead. So when you put your hose on, you have to cut the end off and put a hose clamp on the hose to hold it on to the pump. Not with this pump, it is ready to pump water out and is EPA and CARB approved. This means it is held to the highest standards and meets California high emission standards, along with the rest of the United States standards for motors. Don't be fooled into buying a junk water pump for the same money as ours. It also has an One Year Warranty. You have nothing to lose, only to gain with the PowerMax Water Pump. FEATURES *Durable 6.5 Hp. Air cooled OHV gasoline engine w low oil shutoff and idle control *EPA CARB approved with 2'' ID intake outlet w back flow check valve *Pump overhead lift: 91 ft., Suction height: 26 ft *Gallons per minute: 158 gpm. + .6 gallon fuel cap *2.4 hour run time on a single tank of gas INCLUDES intake hose end strainer, threaded hose ends connectors clamps, tool kit w plug wrench." PowerMax - One Year Warranty 30 Day Satisfaction Guarantee. | *$219.99 |
 | Dust Collection 2 1/2" T-Connector By Peachtree Woodworking - PW407
Brand: Peachtree Woodworking Part Number: PW407
The 2 1/2" Y-Connector, 2 1/2" T-Connector, 2 1/2" Elbow Connector) and the 2 1/2" Splice Connector (EACH SOLD SEPARATELY) will allow you to set up your ultimate Dust Collection System | *$3.99 |
 | Dust Collection 4" to 2 1/4" Threaded Quick Adapter By Peachtree Woodworking - PW436
Brand: Peachtree Woodworking Part Number: PW436
Threaded Quick Connects are designed to be pressed on to any 4" taper diameter opening for a quick and easy fit. The opposite end accepts a dust collection hose by threading it on. No hose clamps are required. | *$5.99 |
 | Dust Collection 4" to 2" Reducer By Peachtree Woodworking - PW474
Brand: Peachtree Woodworking Part Number: PW474
4" to 2" allows you to reduce from a 4" hose down to a 2" hose. Hose clamps are required for proper fitting. Many sizes of Reducers / Splices available. Each sold separately. They are 5" to 4", 4" to 3", 4" to 2 1/2", 3" to 2 1/2", 3" to 2", 1 1/2" to 2 1/2", 4" to 1", 2 1/2" hard splice, 2 1/2" screw adapter end, 2 1/2" hose splice, 4" hose splice | *$3.99 |
 | Dustless Technologies 16003 16 Gallon Dustless Wet Dry Vacuum with 12-Foot-by-1-1/2-Inch Hose
Brand: Dustless Technologies Model: 16003 Part Number: 16003
DUSTLESS TECHNOLOGIES HEPA Wet/Dry Vacs help recover asbestos, lead dust, and other airborne pollutants. Quiet vac has a patented filtration system that is 99.5% efficient at 0.5 microns. H.E.P.A. vac filtration effectively removes 99.97% of all particles to 0.3 microns. Both change from wet to dry pickup without removing filters. Include: 2 extension wands, crevice tool, utility nozzle, 1 micro prefilter bag, 12' crushproof hose, and 15' cord. Water Lift/Air Flow: 72"/116.59 CFM. 5 hp, 11.5-amp motor. 16-gal. capacity. | *$276.98 |
 | Dustless Technologies 16006 16-Gallon Dustless Wet/Dry Vacuum with Hepa Filter, 12-Foot by 1-1/2-Inch Hose
Brand: Dustless Technologies Model: 16006 Part Number: 16006
DUSTLESS TECHNOLOGIES H.E.P.A. Wet/Dry Vacs help recover asbestos, lead dust, and other airborne pollutants. H.E.P.A. vac filtration effectively removes 99.97% of all particles to 0.3 microns. Changes from wet to dry pickup without removing filters. Include: 2 extension wands, crevice tool, utility nozzle, 1 micro prefilter bag, 12' crushproof hose, and 15' cord. Water Lift/Air Flow: 72"/116.59 CFM. 5 hp, 11.5-amp motor. 16-gal. capacity. | *$399.00 |
 | Dustless Technologies 50001 Turbo Drywall Sander with 7-Foot Extendable Pole
Brand: Dustless Technologies Model: 50001 Part Number: #260675
Suggested ItemsOverviewpThe Dustless Turbo Drywall Sander is ideal for homeowners, do-it-yourselfers and renovation contractors who are looking for a lightweight, light-duty drywall sander that can reach into tight places and corners. It is also a great accessory for professional contractors who want an effective tool for touch up work.New and Improved!brThe re-engineered Dustless Turbo Drywall Sander now features an improved air turbine in the orbital head that delivers 10,000 RPMs for faster, more aggressive sanding. The unit now also comes with a coarser 60 grit sand paper to speed sanding even more.Reach into tight places and sand in corners:brThe rectangular sanding head allows users to sand in corners something the large, professional sanders, with round heads, can t do. The orbital sanding head is also smaller than commercial units making it perfect for kitchen and bathroom work, where space is tight.Lighter is better:brThe Dustless Turbo Drywall Sander is also much lighter than professional units, weighing less than 5 lbs, compared to typical 8 lbs units. The simple, brilliant design of the orbital sanding head eliminates the need for a electric motor mounted on the pole and greatly reduces the system's weight.Capture 99% of airborne dust:brAir is pulled through channels on all four sides of the sanding head to capture 99% of the drywall dust at its point of origin.Reach higher!brbr/pSpecificationsp/pliLightwei ght - only 5 lbs./liliExtendable pole to reach high ceilings/liliRectangular head for corners/liliSmaller head for tight places in kitchens and baths/liliPowered by vacuum air/liliDesigned for use with Dustless Wet Dry Vacuum/liliNo heavy electric motor on the pole/liliImproved turbine for 10,000 RPMs/liliMesh based sandpaper for improved performancep/p/li | *$115.00 |
 | Dustless Technologies MU305R Cheetah II Ash Vacuum, Red
Brand: Dustless Technologies Model: MU305R | *$185.06 |
 | Dustless Technologies MU405G Cougar Ash Vacuum, Green
Brand: Dustless Technologies Model: MU405G | *$203.58 |
 | Dustless Technologies Wet Dry Micro Pre Filter Bag, 2-Pack
Brand: Dustless Technologies Model: 13141 Part Number: DT13141
From the Manufacturer Accessory for 160-01 This is a 2 pack of replacement bags for the Love-less wet/dry vacuum. Have you checked the vacuum bag lately? Maybe it's time for new Micro-Prefilter bags for your hardworking cleaning friend. Love-Less vacuum bags are the heart and soul of the Love-Less shop vac. A durable design securely bags chips, dust, and other woodshop debris. If you've got a big dry wall project coming up, this two-pack is just what you need to clean up quickly. Change that bag now so that your Love-Less provides optimal cleaning performance. FEATURES Bags chips, dust, and other woodshop debris Great for drywall cleanup Fresh bags mean optimal cleaning performance, cleaner tools and cleaner lungs SPECIFICATIONS Exclusive bags for the Love-Less wet/dry shop vacuum | *$17.50 |
 | Dynabrade (DYB69029) 6" Central Vac Dynorbital Silver Supreme Sander - 3/16" Diameter Orbit
Brand: Dynabrade Part Number: 69029
pstrongFeatures and Benefits:/strong/pul liIncludes low profile, premium urethane weight-mated sanding pad/li liTrue 12,000 RPM air motor/li liComfort platform provides additional hand and wrist support, further enhancing operator comfort/li liThrottle lever recesses into housing grip when depressed, eliminating pressure point on operator's palm/li liFor high production usage, enhanced ergonomic features/li/ulpGrey lever identifies 3/16" diameter orbit, used for general sanding and leaves fine scratches for easy buffing. Floating rotor utilizes five blades, producing more usable power. High strength, composite rotor has better lubricating qualities, allowing blades to last longer. Less air is used more efficiently to maintain maximum power. Lever is made from composite material to insulate against cold air. Lever is color coded to designate tool orbit. Low sound levels. Specifications: .26 HP; rear exhaust; max. air flow: 16 scfm @ 90 PSIG, length: 7-3/4"; height: 3-1/2"; sound level: 83 dBA; weight: 2 lbs./pp /p | *$185.99 |
 | Dynorbital-Spirit Sanders
Brand: Dynabrade Part Number: 59020
59020 This item features: -Custom engineered composite cylinder. -Double row balancer bearing keeps out contaminants. -Can be converted easily to self-generated or central vac model for hook-up to dust collection system. -Disc/Pad Diam: 5 in. -Orbit Diam: 3/16 in. -Spindle Thread: 5/16 in - 24. -Power Cap.: 1/4 hp. -Free Speed: 12000 rpm [Max]. -Air Consumption: 2 CFM [Max], 14 SCFM [Max]. -Pressure: 90.00 PSIG. -Noise Level: 75.0 dB [Max]. -Inlet Size: 1/4 in (NPT). -Hose Size: 1/4 in. -Length: 6 1/2 in. -Height: 3 1/2 in. -Control Type: Lever Throttle. -Handle Type: Palm Style. -Includes: Urethane, Weight-Mated, Non-Vac Pad. -Wt.: 1.40 lb. -Price is for 1 Each. | *$145.00 |
 | Earlex HV3000 Spray Station HVLP Paint Sprayer
Brand: Earlex Model: HV3000 Part Number: HV3000US | *$119.64 |
 | Earlex HV6900 Spray Station HVLP Paint Sprayer
Brand: Earlex Model: HV6900 Part Number: HV6900
The professional, commercial grade HV6900 is a powerful HVLP unit suitable for thick and thin viscosity paints great for making light work out of the arduous jobs for the professional with hard-wearing aluminum spray gun. 3 spray patterns, horizontal fan, vertical fan and detailed. "Push N Click" system to change patterns. 1 quart Teflon-coated, balanced, anodized metal spray gun. Adjustable 1"-12" fan width. Powered by a 3-stage 1100W Ametek Turbine rated at 5 psi and 71 cfm, this new Earlex has the muscle for big jobs and the finesse for small ones. No finishing job is too large or small. Youll find yourself not only using it for all your finishing needs but youll also be painting with it as well. | *$499.99 |
 | Earlex HVACC25USR Coarse Finish Needle
Brand: Earlex Model: HVACC25USR Part Number: HVACC25R
Replacement needle kit for Earlex Spray Station 3000 | *$23.99 |
 | Earlex L0242 Spare Spray Gun
Brand: Earlex Model: L0242 Part Number: HV1900HB | *$39.99 |
 | EazyPower 6" Hole Saw for CornHole Boards
Brand: EazyPower Model: 30125 Part Number: 30125
This is an EazyPower 6" Hole Saw- Perfect for making holes in Cornhole Boards. Also great for duct work, AC/Heat registers, ceiling lights, and speakers. Works with 3/8" or 1/2" drills. | *$20.99 |
 | Eazypower 81544 90-Degree 3/8-Inch Angle Drill Attachment
Brand: Eazypower Model: 81544 Part Number: 81544
90degree. Angle Drill Attachment, Complete With Jacobs 3/8" Chuck, Lubricate Grease Fitting In Gear Box For Long Life Trouble Free Operation, Tighten As Drill Bit Into Existing Chuck, Simple To Use, Never Remove Chuck From Drill To Put On Attachment, Double Blister. | *$37.52 |
 | ECG HG-300D Mini Heat Gun
Brand: ECG Model: HG-300D Part Number: HG-300D
The ECG HG-300D mini heat gun is the perfect accessory for heat shrink tubing applications. Its light weight comfortable design and built-in, self-supporting bracket make it fast and easy to use. The HG-300D features 2 speed/temperature settings and whisper quiet operation. | *$19.88 |
 | ECG J-045-DS 45 Watt Desoldering Iron
Brand: ECG
This professional 45 watt de-soldering iron is a must for any shop, lab, or hobbyist, Features an ergonomically designed cool grip rubber handle, replaceable long life tip. Provides an operating tip temperature of 788°F for quick removal of solder by way of its integrated pump. 120 VAC. Replacement tip JT-103. | *$21.80 |
 | ECG J-060 60 Watt Soldering Iron
Brand: ECG
This professional 60 watt soldering iron features a replaceable tip, ergonomically designed cool grip rubber handle, and a nickel-iron plated long life copper tip. Provides an operating tip temperature of 860°F with fast heat time and quick heat recovery. 120 VAC. Replacement tip JT-102. | *$18.65 |
 | ECG JT-101 Replacement Soldering Iron Tip For J-025 2 Pcs.
Brand: ECG
Conical and chiselreplacement tips for J-025 25 watt corded soldering iron. Nickel plated copper. 2 tips per package. | *$2.99 |
 | ECG JT-103 Replacement Desoldering Iron Tip For J-045-DS
Brand: ECG
Replacement tip for J-045-DS 45 watt corded desoldering iron. Nickel plated copper. 2 tips per package. | *$5.35 |
 | Eclipse 500-007 Professional's Electronic Tool Kit
Brand: Eclipse Part Number: 500-007
Eclipse 500-007 is a Professionals Electronic Tool Kit. This kit contains almost every tool which is required for any professional in Electronics. Some of the tools included are 13 Assorted screwdrivers, 6 Assorted precision screwdrivers. | *$239.00 |
 | Eclipse CP-463 Closed Barrel Contact 4-indent Crimper..AWG 12-20
Brand: Eclipse Model: CP 463 Part Number: CP-463
Eclipse CP-463 Closed Barrel Contact 4-indent Crimper..AWG 12-20 | *$24.95 |
 | ELECTRIC HEAT GUN
Brand: Pitbull Part Number: CHIGH0012
Electric heat gun with a compact design with low noise and high blowing speed.A motor power of 1500 Watts 2 low noise blowing speeds of 400/Mis and 550m/Min | *$12.40 |
 | Electric Heat Gun with Accessories
Brand: Raffael Tools Part Number: LIC HG
- Color May Varybr Features:br - Voltage: 110 Vltbr - Frequency: 60 Hzbr - Motor Power: 1500 Wattsbr - Low Noisebr - 2 Blowing Speed:br 1 - 280-400m/Minbr 2 - 480-550m/Minbr - Adjustable Temperature Setting:br I : 375 C-Degreesbr II: 495 C-Degreesbr - Included: 4 Pcs Accessoriesbr Weight: 3.75 Lbs | *$11.77 |
 | Electric Heated Decal, Sticker and Adhesive Remover
Brand: Chicago
Uses heat to easily remove decals, pin stripes, stripping tape, stickers and more.
Plugs into any 110 volt outlet
Uses ordinary scraper razor blades
Heated blade won't blister paint like a heat gun
Comes with two blades and a stand
Overall dimensions: 8-1/4" L x 1-7/32" OD; Cord length: 6 ft. | *$14.50 |
 | ELECTRIC JIG SAW
Brand: Pitbull Part Number: CHIG024
Level cuts up to 45 degree right or left - Great DIY Tool to complete any Man's Toolbox!! | *$13.95 |
 | Electric Replacement Starter - Briggs Stratton Single Cylinder Engine
Brand: Oregon
Popular electric replacement starters for Briggs and Stratton and Kohler engines meet or exceed OEM specifications. Engine: Single Cylinder, Engine Type: Electric, Application: Replacement starter | *$41.99 |
 | Electric Replacement Starter - Briggs Stratton Twin Cylinder Engine
Brand: Briggs and Stratton
Popular electric replacement starters for Briggs and Stratton and Kohler engines meet or exceed OEM specifications. Engine: Twin cylinder, Engine Type: Electric, Application: Replacement starter | *$40.99 |
 | Electrical Hand Mortar Mixer Concrete Paint Tool More
Brand: Neiko Part Number: 10374A
Electril Hand Mortar Mixer UL Approved, 120V-60 Hz *Two Variable Speed Settings for Concrete to Paint: 100-400RPM,150-700 RPM *High Torque 59ft lb. | *$99.99 |
 | Electrodes Model Code: AC - Price is for 1 Each (part# 9-6006)
Brand: Thermal Dynamics Part Number: 9-6006
9-6006 Model Code: AC - Price is for 1 Each (part# 9-6006) Features: -Price Is For One Each -Minimum Order Of 1. -Maximizer 300 torch consumables and maintenance parts.. -No tools required.-All Thermal consumable parts are manufactured to exact tolerances with the knowledge of critical dimensions and relationships, therefore, delivering consistently high performance with set of consumable parts.. -UNSPC CODE: 23271707. -Torch Model : Maximizer 300. -Plasma Torch Consumables Plasma Torch Consumables welders accessories torches consumable tip tips cutting electrode electrodes shield cup drag nozzle nozzles shields.-ELECTRODE. | *$13.18 |
 | Electronic Solder 60/40 .050" 1 lb. Spool
Brand: Parts Express
High quality solder for electronic and electrical work. 60% tin and 40% lead with flux in the core for a strong, long lasting bond. Diameter: .050". 1 lb. spool. | *$15.27 |
 | Emerald Innovations 11450P24 Halloween Battery Operated Pumpkin Carver Knife
Brand: Emerald Innovations Model: 11450P24 Part Number: 11450P24
"EMERALD" HALLOWEEN BATTERY
OPERATED PUMPKIN CARVER
*Uses 4 "AA" batteries
(included)
*Blister card | *$15.99 |
 | Endeavor Tool Company Gator Grip Gator Master 5-pc kit ETC-270
Brand: Endeavor Part Number: 270
Always the Right Size Socket. Self Adjusting Universal sockets, Fits Both Standard and Metric Fasteners. This 5 piece kit includes the 3/4" socket plus the King Gator 1.25" socket along with adapters and storage case. GATOR-GRIP Does The Work of Many Tools, sets of sockets (both English and Metric), standard and locking pliers, and an entire range of open end wrenches. Gator Grip. Why waste time searching for the correct tool when one socket can do the work of a whole set? The ingenious Gator Grip makes half of your toolbox obsolete! It fits virtually anything. The one socket fits fasteners of almost any shape - square, hex, wing nuts, cup hooks, eye screws and even broken, stripped and rusted nuts other wrenches can't move. | *$29.26 |
 | Endeavor Tool Company Gator Grips Universal Socket: with drill adapter ETC-120A
Brand: Endeavor Model: ETC120 #20120A Part Number: 120A
Gator Grip - One Socket That Does The Work Of a Whole Set! Self Adjusting Universal socket. Fits Both Standard and Metric Fasteners. GATOR GRIP Does The Work of Many Tools, sets of sockets (both English and Metric), standard and locking pliers, and an entire range of open end wrenches. Gator Grip. Why waste time searching for the correct tool when one socket can do the work of a whole set? The ingenious Gator Grip makes half of your toolbox obsolete! It fits virtually anything. The one socket fits fasteners of almost any shape - square, hex, wing nuts, cup hooks, eye screws and even broken, stripped and rusted nuts other wrenches can't move. No more reaching into your tool box, grabbing socket after socket until you find one that fits. The Gator Grip instantly conforms and locks onto any shape nut, bolt or fastener. It won't slip off nuts or strip them. With Gator Grip, you get the job done fast with no hassle and little effort. The revolutionary socket design automatically adjusts to fit any nut or bolt from 1/4" to 3/4" , 7-19 mm! Works great on metric, standard, wing nuts, broken nuts, stripped nuts, eye bolts, square nuts, hexes and more. Save Time with GATOR GRIP! | *$11.06 |
 | Engraver - Diamond-Tipped
Brand: Hawk Part Number: TJ9907
Recommended by law enforcement and insurance companies as an effective theft prevention and recovery measure, permanently identifying your valuable property is now as easy as using a pen. Engrave your name, initials, address, phone number or any other important information on tools, personal electronic devices, computers, jewelry, professional equipment, family heirlooms, bikes and golf clubs. Thieves prefer to steal and sell items with no permanent ID, but if your property is stolen your personal engraved information makes it easier to recover. Slightly larger than a permanent marker, engraver weighs just 3 oz including 2 AA batteries (not included).**** | *$6.89 |
 | Ernst 5020 10-1/2-inch Square 3-Compartment Tool Tray
Brand: Ernst Part Number: 5020
Find a place for everything in your toolbox (or anywhere else!) with the Ernst 5020 impact-resistant tray organizer. Features: Versatile storage for parts and tools Conveniently holds nuts, bolt screws, etc. Great for sockets, vise grips, pliers, etc. Fits tool boxes, shelves and work benches Stackable design Will fit shallow drawers in standard tool boxes Fuel- and solvent-resistant What's In The Box: Ernst 5020 10-1/2-inch Square 3-Compartment Tool Tray Tools NOT Included | *$5.99 |
 | Esico Solder Pot, Model 36, 250 Watts
Brand: Esico-Triton
Supplied with 3-wire cord only. For tinning, stripping, dip soldering and more. Available in 110/120V and 220V/240V. Dross skimmers not included. Solder watts: 250; Capacity: 2-1/4lbs.; Maximum temperature: 750° F; Model: 110V: inside diameter: 2-1/2"; inside depth: 1-3/4". | *$184.42 |
 | Etch-O-Matic 2 AMP KIT 2 Amp Starter Kit Etch-O-Matic
Brand: Etch-O-Matic Part Number: 2 AMP KIT
Electric Etchers Type: Etch-O-Matic Amperage Rating: 1 | *$86.28 |
| | Eureka 313A Envirosteamer Steam Mop With an Add Water Indicator Light
Brand: Eureka Part Number: 313A
The Eureka 313A Envirosteamer steam mop is designed to thoroughly clean floor surfaces such as marble, ceramic, stone, linoleum, sealed hardwood floors and parquet. It does not use harsh chemicals -- it sanitizes hard floors with steam. The 313A steam mop turn water into steam in mere minutes. It is used to disinfect floors near bathroom stalls, food preparation areas and pet sleeping quarters. pbAdd Water Indicator Light/bbr The Eureka 313A steam mop features an add water indicator light that alerts you when it's time to add more water. pbEasy Reach Design/bbr The 313A steam mop can reach underneath counters and into corners, sanitizing the entire floor with its easy reach design. pbEasy-Release Holders/bbr The steam mop features easy release holders that make it easy to change the magic cloth. pbEliminates Dust Mites and Bacteria/bbr The 313A kills dust mites and some types of bacteria, such as salmonella and e-coli when used properly. | *$79.99 |
 | Evolution Power Tools #RAGESAW 7-1/4" MP Heavy Duty Circular Saw
Brand: Evolution Model: RAGESAW Part Number: RAGESAW
Evolution Rage, 7-1/4", TCT, Multipurpose Circular Saw, Capable Of Cutting Steel, Aluminum Wood Even With Nails In Plastics With One Saw One Blade, Material Is Cool Enough To Touch Immediately After A Cut Is Made, Cuts With Virtually No Sparks Or Burrs, No Coolant Required, Collects Wood Or Metal Chippings Automatically With A Unique Collection System Built Into The Saw. | *$131.99 |
 | Evolution Power Tools FURY2 14-Inch Multipurpose Cutting Chop Saw
Brand: Evolution Model: FURY2 | *$199.99 |
 | Evolution Power Tools FURY3 8-1/4-Inch Multipurpose Cutting Compound Sliding Miter Saw
Brand: Evolution Model: FURY3 Part Number: Fury3
Cut Steel, Aluminum Wood (even wood with nails) with this outstanding Sliding Miter Saw, using just one blade! Featuring a Twin Clamp system which offers cutting security, helping to build confidence in even the most inexperienced power tool user. Ergonomically, this machine is enhanced by an in-line handle and trigger switches, enabling right or left handed use. The FURY3 is amazing value for money and features the same RAGE technology that inhabits the professional Evolution Build Multipurpose Saws. An essential addition to any home workshop, this Miter Saw offers accuracy and functionality through materials other DIY mitres can only dream of. Key Features Product Info: Featuring RAGE technology: Cuts Steel, Aluminum, Wood Plastics easily without compromise. Fast and clean cuts, the FURY3 leaves virtually no burr and offers an instantly workable finish. Economical performance, the FURY blade system will out perform traditional TCT blades*. Compound tilt and slide mechanism offers a solution to almost all common applications. The Hi-torque gearbox reduces motor stresses, improving performance and durability. No coolant required and virtually no sparks are produced. High quality construction. Includes: FURY3 Sliding Miter S.A.W., FURY3 Blade, Operators manual Technical Specifications: Motor (Available in 110v): 1400 Watt Max Depth Cut (90º Bevel): 2.4 Max Depth Cut (45º Bevel): 1.4 Max Width Cut (90º Mitre): 8.7 Max Width Cut (45º Mitre): 5.5 Speed (No Load): 3000min-1 Machine Weight: 22.2 lbs Product Dimensions (HxWxL): 14.8 x 21.1 x 23 Recommended Maximum Duty Cycle: 30 mins Sound Pressure Level (Under Load): 98 db(A) Blade Specifications: Diameter: 8-1/4 Bore: 1 Kerf (Thickness): 0.078 (5/64 ) Number of Teeth: 20 | *$144.99 |
| | Ex-Cell EH381 3/8-Inch x 25 Air Hose
Brand: Porter-Cable Model: EH381 | *$8.50 |
