 | Magna Cart Elite 2 Hand Truck
Brand: Welcom Model: MC2S Part Number: MCES
The Magna Cart Elite2 Hand Truck. Engineered with toughness in mind…holds up to 200 lbs., but only weighs 10.5 lbs. Compacted, it measures only 28" tall and 2" wide…great just about anywhere. It's slim size helps it store anywhere....on a peg hook in your garage or closet, in your trunk, a nook or cranny in your RV...just think of the possibilities. It extends to 39" tall to conform to almost any body length comfortably...and the 7" rubber (no air ever needed) rolls on any surface smoothly. | *$54.99 |
 | Mahogany African Ribbon Veneer 2 x 8 Sheet Flexwood 10 mil paperback
Brand: GL Veneer
Veneer sheets are composed of sliced hardwoods, book matched across the face, and 10 mil (10 thousandths) paper backing. The paper back allows the wood to bend, flex, and work with curves and shapes without splitting. These veneers apply easily with contact cement. | *$35.99 |
 | Mahogany Genuine Veneer 2 x 8 SheetFlexwood 10 mil paperback
Brand: GL Veneer
Veneer sheets are composed of sliced hardwoods, book matched across the face, and 10 mil (10 thousandths) paper backing. The paper back allows the wood to bend, flex, and work with curves and shapes without splitting. These veneers apply easily with contact cement. | *$31.99 |
| Mahogany Veneer Pack 7 Sq. Ft.4 pcs, 8'' x 32''
Brand: Woodworkers Source
Typical uses for this veneer is reproducing table tops, repairing old furniture, inlaying, and creating marquetry. | *$12.99 |
 | Maid-o-mist #1 MAIN Straight Steam Vent 1/2"FPTx3/4"MPT
Brand: MAID-O-MIST Model: #1 MAIN Part Number: #1 MAIN
"MAID-O-MIST" STEAM VENT :
1/2" FPT 3/4" MPT.
Straight.
Use one or more at the end of the short main, or the main running to the warm side.
Use two or three at the end of the long main, or the main running to the cold side.
Float prevents water escape.
Assures even heat distrubution.
Reduces radiator noise.
Boxed. | *$16.79 |
 | Malco Products Inc. GOT Gutter Outlet Punch with GOP23UK Punch Die [Misc.]
Brand: Malco Model: GOT Part Number: GOT
The Malco GOT Gutter Outlet Punch makes clean and accurate hole cuts in .032" aluminum gutter. Included in with the Malco GOT is the Malco GOP23UK Punch and Die Assembly that allows you to make 2" X 3" standard rectangle holes. Other punch,dies and replacement blades are avaiable but are sold separately.
The Malco GOT provides you with ample throat clearance that allows this lightweight outlet punch to work over the front edge of the gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional work bench mounting. An easy ratcheting mechanism and angled punch-blade provide a smooth cutting action. This GOT has heat treated components and a weather resistant finish that provides added strength and durability. | *$152.77 |
 | Malco Products Inc. TNP2R Trim Nail Punch w/ Retaining Clip [Misc.]
Brand: Malco Model: TNP2R Part Number: TNP2R
The Malco TNP2R Heavy Duty Trim Nail Punch with Retaining Clip allows easier nailing from any angle or height. Use the TNP2R to drive trim nails into soffit, fascia, and other finishing trim with out denting or marring material. The exclusive nail retaining clip feature helps you avoid the awkwardness and strain of balancing nails in the nose of the punch or holding back the drive pin while reaching out to the nail. The nail retaining clip feature also minimizes scrapes and dents caused by nail slip or improper setting depth. Use the Malco TNP2R for speed, ease of use and accuracy. | *$16.16 |
 | Man O War Spar Marine Varnish - 80-7509 Qt Gloss Spar Varnish
Brand: Valspar Model: 80-7509 Part Number: 80-0007509-05
"MAN O'WAR" MARINE SPAR VARNISH
Finish: Gloss
Size: 1 qt
Clean air formula.
Superior outdoor finish for extra protection from sun and weather.
Ideal for entryways, garage doors and door sills. | *$15.28 |
 | MANNA PRO DAIRY AIDS KID MILK REPLACER
Brand: Manna Pro Part Number: 00-9403-0209
A cup* is provided in each kid milk replacer bag. Instantized milk replacer for goat kids. Mix one enclose cup of kid milk replacer powder into 1 pints of warm (110o f) water. The following amounts of reconstituted milk replacer should be fed daily, as in | *$15.48 |
 | MANNA PRO OPTI ZYME PROBIOTIC ANIMAL SUPPLEMENT
Brand: Manno Pro Milk Products Part Number: 99490338
TOP DRESS OPTI-ZYMEÄ AT THE FOLLOWING LEVELS HORSES 1-2 OZ-HEAD-DAY BEEF DAIRY CATTLE 1-2 OZ-HEAD-DAY PIGS 025-050 OZ-HEAD-DAY SHEEP 025-050 OZ-HEAD-DAY GOATS 025-050 OZ-HEAD-DAY from aBlackHorse.com | *$12.99 |
 | Manual Lever Hoist 10 Foot Lift 6000 Pound Capacity
Brand: Global Industrial Part Number: ELH-60-10
MANUAL LEVER CHAIN HOIST Includes Free 12 Pocket Storage Bag! Compact lever hoist is designed for single hand operation in confined spaces. Short handle stroke requires minimal effort. Free-wheeling neutral position speeds load attachment by quickly taking up slack. Completely enclosed Weston-type automatic brake provides positive load control. Drop-forged hooks, with deformation indicators on throat openings, swivel 360° and have safety latches. Strong grade 80 alloy steel chain. Meets ASME B30.21 specifications. 1 Year Warranty. | *$225.95 |
 | Maple - 36'' x 6'' Dimensional Veneers- No Backing
Brand: Rockler
Face grade veneer sheets with no backing material. Veneer has straight, parallel edges and no defects. Approximate sizes usually run about 1/2" over. All dimensional veneers are plain sliced unless otherwise noted. Grain runs lengthwise. Veneers are from 1/40" to 1/28" thick. 36" long. brbr brNOTE: Because of special handling requirements, there is a two sheet minimum order required for this product. | *$3.79 |
 | Maple Birds Eye Sample Standard collectors size 1/2'' x 3'' x 6''
Brand: Woodworkers Source
Perfect for testing finishes, stains, and working properties. Also milled to the standard sample size as dictated by the International Wood Collectors Society. (Shipping is included) | *$4.00 |
 | Maple Veneer Pack 7 Sq. Ft.4 pcs, 8'' x 32''
Brand: Woodworkers Source
Typical uses for this veneer is reproducing table tops, repairing old furniture, inlaying, and creating marquetry. | *$12.99 |
 | Maple Veneer, Flat Cut, 2 x 8, 10 Mil, PSA Backer
Brand: Veneer Tech Part Number: VNMAPLEFC2X810PSA
This Maple, Flat Cut Premium Wood Veneer is suitable for fine woodwork, furniture, and cabinets. It can be applied with contact adhesive. As with any wood veneer, a clean, smooth, well prepared surface is essential for proper adhesion. Please follow the instructions carefully. This is a natural wood product, the color and grain pattern will vary from what is pictured. | *$56.00 |
 | Maple Wood Edge Banding Tape 13/16'' 250' Roll
Brand: Flexible Materials
Edge Tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. | *$39.00 |
 | Maple, 2" x 2" x 30"
Brand: Woodcraft Woodshop Part Number: 50W62
Maple (Acer saccharum) sapwood color ranges from nearly white, to an off-white cream color, sometimes with a reddish or golden hue. The heartwood tends to be a darker reddish brown. Fairly easy to work with both hand and machine tools. Maple has a tendency to burn when being machined with high-speed cutters such as in a router. Turns, glues, and finishes well, though blotches can occur when staining, and a pre-conditioner, gel stain, or toner may be necessary to get an even color. Some common uses for hard maple include flooring (from basketball courts and dance floors to bowling alleys and residential), veneer, pulpwood, musical instruments, cutting boards, butcher blocks, workbenches, baseball bats, and other turned objects and specialty wood items. Larger blocks are sawn to +/- 1/4" of size listed, smaller blocks +/- 1/8". Spindle stock (1-1/2" - 2") dimensions are +/- 1/8". Grain runs with the longest dimension. USA. | *$10.99 |
| Maple, 3/8" x 3" x 24"
Brand: Woodcraft Woodshop Part Number: 50W50
Maple (Acer saccharum) sapwood color ranges from nearly white, to an off-white cream color, sometimes with a reddish or golden hue. The heartwood tends to be a darker reddish brown. Fairly easy to work with both hand and machine tools. Maple has a tendency to burn when being machined with high-speed cutters such as in a router. Turns, glues, and finishes well, though blotches can occur when staining, and a pre-conditioner, gel stain, or toner may be necessary to get an even color. Some common uses for hard maple include flooring (from basketball courts and dance floors to bowling alleys and residential), veneer, pulpwood, musical instruments, cutting boards, butcher blocks, workbenches, baseball bats, and other turned objects and specialty wood items. This thin stock is cut to size from quality, kiln-dried stock. 100 percent clear and sanded on both sides. Dimensions are +/- 1/8". Grain runs with the longest dimension. USA. | *$6.99 |
 | Maple, Birds-Eye, 1" x 4" x 24"
Brand: Woodcraft Woodshop Part Number: 149843
Birds-eye maple (Acer saccharum) is so named because the figure resembles small birds eyes. Birds-eye figure is a phenomenon that occurs within several kinds of wood, most notably in hard maple. The figure is reportedly caused by unfavorable growing conditions for the tree. The sugar maple attempts to start numerous new buds to get more sunlight, but with poor growing conditions the new shoots are aborted, and afterward a number of tiny knots remain. Birds-eye maple is frequently sold in veneer form, but solid lumber is available as well. Being tiny knots, the birds-eye figure is most noticeable and pronounced on flatsawn pieces of lumber. It turns well on a lathe, allowing it to be shaped into decorative canes, bottle stoppers and pens. It is used in refined specialty products, such as in automobile trim, both in solid form and veneer, boxes and bowls for jewelry, thin veneer, humidors, furniture inlays, handles, guitars, and pool cues. When working with birds-eye wood, it is advisable to use sharp tools so as to prevent grain tear-out. This thin stock is cut to size from quality, kiln-dried stock sanded on both sides. Dimensions are +/- 1/8". Grain runs with the longest dimension. USA. | *$19.99 |
 | Maple, Burl, 3 Sq. Ft. Veneer Pack
Brand: Sauers Part Number: SCV-3-MPLBRL
High quality real wood veneers from around the world, packaged in a convenient size that won't break your budget! Each pack contains 3 square feet of unbacked veneer that ranges in size from 4-1/2" to 6-1/2" in width by 12" in length. Just the right size for marquetry, inlay repair, accents on furniture and any other small job around the shop. | *$24.99 |
 | Mappa Burl, 3 Sq. Ft. Veneer Pack
Brand: Sauers Part Number: SCV-3-MPABRL
High quality real wood veneers from around the world, packaged in a convenient size that won't break your budget! Each pack contains 3 square feet of unbacked veneer that ranges in size from 4-1/2" to 6-1/2" in width by 12" in length. Just the right size for marquetry, inlay repair, accents on furniture and any other small job around the shop. | *$17.99 |
 | Marathon 4.10 / 3.50 - 4 Air Filled Tire
Brand: Marathon Model: 20010 Part Number: 20010
Mounted on a 2.25" off-center hub; 5/8" ball bearing
Please contact Marathon for additional hub and axle sizes. | *$19.99 |
 | Marathon 4.10 / 3.50 - 6 Flat Free Tire
Brand: Marathon Industries Model: 00120 Part Number: 00120
Measuring 12" in diameter and 4.50" wide, this tire can hold up to 500 lbs. This tire is often used on large hand trucks and a variety of other equipment. It comes in a sawtooth tread.
Marathon Flat Free Wheelbarrow tires provide the bounce and load handling characteristics similar to an air-filled tire -with the benefit of never going flat.
Contact Marathon for additional hub and axle sizes. | *$39.99 |
 | Marathon Industries 00011 10.5-Inch 3/4-Inch Bore Flat Free Hand Truck Tire With Off-Centered Hub And Sawtooth Tread - 4.10/3.50
Brand: Marathon Model: 00011
The Marathon flat-free 10in. solid polyurethane tire is a hassle-free replacement tire for hand trucks, generators, compressors, pressure washers, carts and more. | *$29.99 |
 | Marathon Industries 00123 12.5-Inch 5/8-Inch Bore Flat Free Hand Truck Tire With Sawtooth Tread - 4.10/3.50
Brand: Marathon Model: 00123 Part Number: 00123
Eliminate downtime! Marathon flat free 4.10/3.50-6-Inch tire is a contractor grade wheelbarrow tire. Airless tires have the same bounce, feel, cushioning, and performance as a regular air-filled tire. They are also non-marking and will not be affected by ozone or uv rays. Tires are made of lightweight, solid polyurethane foam and are guaranteed to never go flat. Mounted on an 6-Inch steel rim with a 3-Inch centered hub and 5/8-Inch ball bearings. | *$39.99 |
 | Marathon Industries 00210 10.5-Inch 5/8-Inch Bore Flat Free Hand Truck Tire With Sawtooth Tread - Universal Fit
Brand: Marathon Model: 00210 Part Number: 210
Marathon Flat Free Hand Truck/utility Tire 10 Flat Free Universal Tire Comes With A Variety Of Hub And Axles To Fit Most Hand Trucks And Other Lawn And Garden Equipment (generators And Pressure Washers) Solid Polyurethane 4.10/3.50 - 4 Tire With A 2.25 Offset Hub 5/8 Ball Bearings (installed) Includes 3/4 Bushing And 1/4, 5/8, 3/4 And 1 Spacers For Hub Length Boxed Discovery Hwu All items sold new in original packaging | *$34.99 |
| Marathon Industries 10-Inch Flat Free Hand Truck Tire
Brand: Marathon Model: 10 Part Number: 00010
Contractor-grade solid microcellular polyurethane tire performs like an air tire, yet never goes flat! Lightweight and durable. Mounted on a heavy-duty steel rim with ball bearings and grease fitting. Tire Type: Microcellular Polyurethane, Rim Size (in.): 4, Tire Size: 4.10/3.50-4, Bore Diameter (in.): 5/8, Bearings Included: Yes, Hub Width (in.): 2 1/4, Load Capacity (lbs.): 300, Rim Included: Yes, Grease Fittings: Yes, Tread Type: Sawtooth | *$24.99 |
 | Marathon Industries 20210 10.5-Inch 5/8-Inch Bore Air Filled Pneumatic Hand Truck Tire With Sawtooth Tread - Universal Fit
Brand: Marathon Model: 20210 Part Number: 20210
Marathon Air Filled (pneumatic) Hand Truck/utility Tire 10 Universal Tire Comes With A Variety Of Hub And Axles To Fit Most Hand Trucks And Other Lawn And Garden Equipment (generators And Pressure Washers) 4-ply Rubber With Tube 4.10/3.50 - 4 Tire With A 2.25 Offset Hub 5/8 Ball Bearings (installed) Includes: 3/4 Bushing And 1/4, 5/8, 3/4 And 1 Spacers For Hub Length Boxed Discovery Hwu All items sold new in original packaging | *$10.99 |
 | Marathon Industries 20501 4-Inch 4 Ply Rubber Replacement Wheel Tube and Tire - 4.10/3.50
Brand: Marathon Model: 20501 Part Number: 20501
4.10/3.50-4 pneumatic tube and tire | *$12.99 |
 | Marathon Industries 20601 4-Inch 4 Ply Rubber Replacement Wheel Tube and Tire - 2.80/2.50
Brand: Marathon Model: 20601 Part Number: 20601
2.8/2.5-4 pneumatic tire and tube | *$12.99 |
 | Marathon Industries 20990 4-Inch 4 Ply Rubber Replacement Wheel Tube - 4.10/3.50
Brand: Marathon Model: 20990 Part Number: 20990
4.10/3.50-4-Inch 4 ply rubber replacement inner tube. | *$9.99 |
 | Marathon Industries 20991 4-Inch 4 Ply Rubber Replacement Wheel Tube - 2.80/2.50
Brand: Marathon Model: 20991 | *$9.99 |
 | Marazzi Tile - Glazed Ceramic Tile Imperial Slate Tile SAMPLE FOR: 12X12 Black Tile
Brand: Marazzi
Marazzi Imperial Slate 12x12 ceramic tile is a favorite for many applications. This beautiful and versatile tile is also a great value at LuxStores. Think this is the best tile for your needs? Then Choose Marazzi Imperial Slate 12x12 ceramic tile from Marazzi Tile Collection | *$0.99 |
| Marazzi Tile - Glazed Ceramic Tile Imperial Slate Tile SAMPLE FOR: 16X16 Black Tile
Brand: Marazzi
Marazzi Imperial Slate 16x16 ceramic tile will be the final search for the best tile for your project. One of our favorites, it will add much to the beauty and overall design of your tile project. Think this is the best tile for your tiling job? Then Choose Marazzi Imperial Slate 16x16 ceramic tile from Marazzi Tile Collection | *$0.99 |
 | Marazzi Tile - Glazed Ceramic Tile Imperial Slate Tile SAMPLE FOR: 16X16 Rust Tile
Brand: Marazzi
Marazzi Imperial Slate 16x16 ceramic tile will be the final search for the best tile for your project. One of our favorites, it will add much to the beauty and overall design of your tile project. Tiling a small project or large this will be a great fit! Then Choose Marazzi Imperial Slate 16x16 ceramic tile from Marazzi Tile Collection | *$0.99 |
 | Marazzi Tile - Glazed Porcelain Tile Aida Tile SAMPLE FOR: 12X12 Aida Beige/Gray Tile
Brand: Marazzi
Marazzi Aida 12x12 ceramic tile is your choice for a superior tile job. While hundreds of companies produce beautiful tile, this tile will be noticed by all for years to come. Found your favorite tile in the endless spectrum of tiles? Then Choose Marazzi Aida 12x12 ceramic tile from Marazzi Tile Collection | *$0.99 |
 | Marshall Stamping 1'0"-1'4" Adjustable Jackpost JP16
Brand: MARSHALL STAMPI Model: JP16 Part Number: JP16
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. | *$9.59 |
 | Marshall Stamping 1'7"-3'0" Adjustable Jackpost JP36
Brand: MARSHALL STAMPI Part Number: JP36
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. | *$20.01 |
 | Marshalltown 6287 Plastic Notched Spreader
Brand: Marshalltown Model: 6287 Part Number: 16287
4" x 4", Notched Spreader/Scraper, Features Mullti-Use With Each Side Of Spreader Having A Different Notch Size 1/16", 1/8", 1/4" 1/4" x 1/8" x 1/4" Square Notch, Molded Plastic, Will Not Rust Or Corrode, Made In USA. | *$0.28 |
 | Marshalltown 978 6-Inch by 4-Inch Notched Spreader
Brand: Marshalltown Model: 978 Part Number: 15812
6" x 4", V Notched Spreader, 3/16" x 5/32" V Notch, Made Of Galvanized Material To Prevent Rust, Blade Is Ribbed For Rigidity Strength, Made In USA. | *$0.53 |
 | Marshalltown ALS504 Aluminum Adjustable Line Stretchers
Brand: Marshalltown Model: ALS504 Part Number: 16504
Pair, Cast Aluminum Line Stretchers To Stretch Mason Lines Between Key Course Blocks, Fully Adjustable From 4" To 12", Bag. | *$7.64 |
 | Marshalltown Company DTK3 Drywall Tool Kit
Brand: Marshalltown Model: DTK3 | *$98.92 |
 | Marshalltown DR389 DuraSoft Drywall Rasp with Rails
Brand: Marshalltown Model: DR389 Part Number: DR389
Durasoft Drywall Rasp With Rails. | *$7.65 |
 | Marshalltown MB10P 46-3/4-Inch by 25-1/4-Inch by 19-7/8-Inch Mortar Buggy with Pneumatic Casters
Brand: Marshalltown Model: MB10P Part Number: 15006
Porter Cable 15006 5" Hook and Loop Lambs Wool Polishing Pad | *$13.95 |
 | Marshalltown ST24 SkyWalker Stilts 1.0 Adjusts 24-Inches to 40-Inches
Brand: Marshalltown Model: ST24 Part Number: ST24
Heavy gauge overlapping aluminum leg tubes. Padded calf brace. Dual spring action. Adjustable metal buckle straps and adjustable heel plates already attached. | *$157.59 |
 | Marshalltown SW218 Skywalker Stilts 2.0 Adjusts 18-Inches to 30-Inches
Brand: Marshalltown Model: SW218 Part Number: 14900
DRYWALL STILTS - 18-30" adjustable stilts ~ 3-way setting ratchet system to fit any leg size ~ Durable quick adjust and release straps ~ Flip switch system allows for quick adjustment ~ Fully adjustable ankle springs allows for a- ~ more natural walking motion ~ 225 lb. weight limit | *$249.99 |
 | Marshalltown SW224 Skywalker 2.0 Stilts Adjusts from 24-Inches to 40-Inches
Brand: Marshalltown Model: SW224 Part Number: SW224
Comfortable calf pad easily adjusts to fit most calves; Calf post assembly adjust to personal preference; Durable quick adjust and release straps; Extra large foot plate for added stability; Flip and switch system allows for quick height adjustment | *$265.00 |
 | Marshalltown Trowel #16254 11"x4.5" U Notch Trowel
Brand: Marshalltown Model: 16254 Part Number: 16254
11" x 4.5", U Notched Trowel, 1/16" x 1/32" x 1/16" U Notch, Black Plastic Handle, For Light Gauge Vinyl Flooring General Mastic, Made In USA. | *$3.53 |
 | Marshalltown Trowel 15330 Drywall Boardlifter
Brand: Marshalltown Part Number: 15330
Model No. 790. Made of heat treated cast aluminum. Taper front end slides easily under board. Nonslip checkered surface provides foot traction. | *$17.90 |
 | Master Lock 2953AT 12-Volt DC Portable Winch
Brand: Master Lock Model: 2953AT Part Number: 2953AT | *$58.99 |
