 | 3/8 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each)
Brand: Reid Supply Company Part Number: ARO-20
Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 3/8 NPT Port, 46.9 SCFM Flow, ARO Check Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-505
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$21.09 |
 | 3/8 NPT Port, 50.4 SCFM Flow, ARO Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-365
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$28.46 |
 | 3/8 NPT Port, 50.4 SCFM Flow, ARO Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-385
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$27.89 |
 | 3/8 NPT Ports, 1 1/2 Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-15
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$72.92 |
 | 3/8 NPT Ports, 1. Inlet, 16 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-218
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$76.03 |
| 3/8 NPT Ports, 1. Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-14
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$59.05 |
| 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-203
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$45.79 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-303
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.71 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-403
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.17 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-02
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$28.50 |
| | 3/8 NPT Ports, 1. Inlet, 4 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-22
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$30.21 |
| 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-322
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$67.06 |
| 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-422
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$67.06 |
| 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-213
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$63.44 |
 | 3/8 NPT Ports, 1. Inlet, 8 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-06
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$41.14 |
| | 3/8 NPT Ports, 1. Inlet, 8 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-26
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$38.81 |
 | 3/8 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-240
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
 | 3/8 NPT Ports, 1. NPT Inlet, 6 Port, 2.25 W x 14.25 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-350
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$58.13 |
 | 3/8 NPT Ports, 1. NPT Inlet, 8 Port, 2.25 W x 18.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-450
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$77.59 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 10 Port, 1.50 W x 15.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-530
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$34.05 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 4 Port, 1.50 W x 4.75 Lg., Aluminum Double Sided Ports - 90 Degree Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-620
Double Sided Ports - 90° | *$24.63 |
| 3/8 NPT Ports, 1/2 NPT Inlet, 4 Port, 1.50 W x 4.75 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-200
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$19.79 |
| 3/8 NPT Ports, 1/2 NPT Inlet, 4 Port, 1.50 W x 6.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-220
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$20.92 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 6 Port, 1.50 W x 6.75 Lg., Aluminum Double Sided Ports - 90 Degree Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-720
Double Sided Ports - 90° | *$25.71 |
| 3/8 NPT Ports, 1/2 NPT Inlet, 6 Port, 1.50 W x 9.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-330
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$23.67 |
| 3/8 NPT Ports, 1/2 NPT Inlet, 8 Port, 1.50 W x 12.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-430
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$31.96 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 8 Port, 1.50 W x 8.75 Lg., Aluminum Double Sided Ports - 90 Degree Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-820
Double Sided Ports - 90° | *$38.43 |
| 3/8 NPT Ports, 1/2 NPT Inlet, 8 Port, 1.50 W x 8.75 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-410
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$29.34 |
 | 3/8 NPT Ports, 120 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-435
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$158.89 |
| 3/8 NPT Ports, 120 V AC, Two Position Double Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-431
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$140.13 |
| 3/8 NPT Ports, 120 V AC, Two Position Single Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-429
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$94.00 |
| 3/8 NPT Ports, 24 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-436
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$158.89 |
| 3/8 NPT Ports, 24 V AC, Three Position Double Exhaust Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-440
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$158.89 |
| 3/8 NPT Ports, 24 V AC, Two Position Single Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-430
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$94.00 |
| 3/8 NPT Ports, 3/4 Inlet, 4 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-201
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$44.13 |
| 3/8 NPT Ports, 3/4 Inlet, 4 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-401
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$48.34 |
| 3/8 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-207
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$54.82 |
| 3/8 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-307
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
 | 3/8 NPT, 1.50 OAL, Parker Exhaust Mufflers (1 Each)
Brand: Reid Supply Company Part Number: MFP-202
Exhaust Port Mufflers | *$11.67 |
 | 3/8 NPT, 1.94 Lg. Open, 11/16 Hex., Parker Muffler / Speed Controls (1 Each)
Brand: Reid Supply Company Part Number: MFP-331
Muffler/Speed Control | *$19.18 |
 | 3/8 NPT, 125.3 SCFM Flow, Parker Check Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-306
Needle, Check and Flow Control Valves | *$39.80 |
 | 3/8 NPT, 3 Unit, Parker Combination FRL's (1 Each)
Brand: Reid Supply Company Part Number: MFP-352
Combination FRL'S | *$99.11 |
 | 3/8 NPT, 3.06 OAL, Parker Exhaust Port Silencers (1 Each)
Brand: Reid Supply Company Part Number: MFP-211
Exhaust Port Silencers | *$22.01 |
 | 3/8 NPT, 3/8 Tube SizeParker Right Angle Flow Controls w/Presto Lock Fittings (1 Each)
Brand: Reid Supply Company Part Number: MFP-328
Right Angle Flow Controls with Presto Lock Fittings | *$34.37 |
 | 3/8 NPT, 33.1 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-310
Needle, Check and Flow Control Valves | *$74.03 |
 | 3/8 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-357
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$45.03 |
 | 3/8 NPT, Parker Lubricators (1 Each)
Brand: Reid Supply Company Part Number: MFP-361
Lubricators - These lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of two micron or smaller. Units should be installed close to the application, ensuring effective distribution of oil to pneumatic components. All units have a polycarbonate bowl. Metal bowl guards sold separately. Maximum pressure is 150 psi and temperature range of 32°F to 125°F. | *$61.12 |
 | 3/8 NPT, Parker Piggy Back Filter / Regulators (1 Each)
Brand: Reid Supply Company Part Number: MFP-355
"Piggy Back" Filter/Regulator - Integral filter regulator "piggy backs" are an excellent choice where accurate pressure regulation and high moisture removal are required in a space saving package. All "piggy backs" come with a polycarbonate bowl (150 psi max.) and a temperature range of 32°F to 125°F. Auto drain is standard on these models with a metal bowl guard. Comes with a 40 micron filter. 30 SCFM. | *$71.06 |
 | 3/8 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-365
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.80 |
|
