 | Heavy-Duty Half Coupling - 1in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): L110 HUB 1, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 1/4 x 1/8 | *$39.99 |
 | Heavy-Duty Half Coupling - 1in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): L100 HUB 1, Outside Diameter (in.): 2 1/2, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 1/4 x 1/8 | *$29.99 |
 | Heavy-Duty Half Coupling - 3/4in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): L100 HUB 3/4, Outside Diameter (in.): 2 1/2, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$29.99 |
 | Heavy-Duty Half Coupling - 5/8in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO99 HUB 5/8, Outside Diameter (in.): 2 1/2, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$19.99 |
 | Heavy-Duty Half Coupling - 7/8in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): L110 HUB 7/8, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$39.99 |
 | Heavy-Duty Half Coupling - 7/8in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft diameter. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. Shaft Diameter (in.): LO99 HUB 7/8, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$19.99 |
 | Heavy-Duty Half Coupling - 7/8in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): L100 HUB 7/8, Outside Diameter (in.): 2 1/2, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$29.99 |
 | Heavy-Duty Half Lovejoy Coupling - 3/4in. Size Brand: Northern Tool Equipment Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO99 HUB 3/4, Outside Diameter (in.): 2 1/2, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$19.99 |
 | Hein-Werner (OMEHW93400) 55 Ton Shop Press with Hand Pump Brand: Hein-Werner Part Number: HW93400 strongFeatures and Benefits/strongul liExcellent for bending, bonding or straightening applications/li liMulti-position bed for work height adjustments/li liHeavy steel welded construction /li liHand pump features 2 speed operation/li liRam 55 ton 6" stroke with a maximum working pressure of 10,000 PSI/700 bar/li/ulThis Hein-Werner shop press is ideal for the removal or installation of gears, univeral joints, pulleys, wrist pins, and other press jobs. Includes 4" pressure gauge. The 2 speed hand pump features pressure relief valve for overload protection and load release valve for single acting cylinder usage. Hand pump is constructed of high strength lightweight aluminum alloy for easy handling and corrision resistance. Hand pump will function in horizontal positions and will also function in some vertical positions. The ram 55 ton 6" stroke features include: rod wiper seals out dirt and contamination; high strength steel contruction from gun drilled solid bar; high flow 3/8" NPTF coupler; one piece high grade alloy bearing for side load protection and long life; polyurethane cup seal provides for optimum performance; industrial hard chrome plated ram helps prevent rust and corrosion; solid steel cylinder body; heavy duty return spring provides quicker retraction.br /br /emstrongDrop Ship Only/strong/em | *$3,588.99 |
 | High Pressure Hydraulic Clutch Pump - 2.32Cu In. Brand: Northern Tool Equipment Each pump operates off truck or equipment engines. Mounted in line with engine belt 2 groove pulley. 7in. pulley diameter. Takes two type A 1/2in. belts. Clockwise rotation. Foot mounts with two 1/2in. tapped holes. Maximum pressure 3000. 1 1/4in. NPTF inlet, 1in. NPTF outlet. | *$519.99 |
 | Hose Half Coupler (male) (277-AH-630) Category: Hydraulic Tool Parts and Accessories Brand: Enerpac Part Number: 277-AH-630 Item #: 277-AH-630. For use with small cylinders and hand pumps pulliOperating Pressure = 10000.0 psi [Max]liFlow = 2500.0 cu. in./min [Max]liThread Size = 1/4 in (NPTF)liInside Style = RegularliType = Male CouplerliWt. = 0.10 lb/ul brCustomers also search for: Discount Hose Half Coupler (male), Buy Hose Half Coupler (male), Wholesale Hose Half Coupler (male), 662005201389, AH-630, Hydraulic Tool Parts and Accessories | *$19.95 |
 | Huffy Sports 8406S Universal Mounting Bracket Brand: Huffy Part Number: 8406S For pole, wall, or roof mount . Comes equipped with two 3 1 2'' diameter U bolts for pole mount. Heavy angle iron bracket designed for mounting backboards to pole or flat surface. Assembly instructions included. Black. NBA endorsed, color litho carton. | *$31.99 |
 | Hydra-Buddy Wheel Kit for Item#s 24500, 24503 24504 Brand: Hydra-Buddy Fits Hydra-Buddy portable hydraulic power unit. Consists of two 8in. O.D. semi-pneumatic tires, all-steel handle assembly and mounting hardware. Handle extension allows Hydra-Buddy unit to be pulled and lifted more easily. Works with item numbers #24500, #24503, #24504. Assembly required. U.S.A. Factory shipped. | *$129.99 |
 | Hydraulic Clutch Pump Brand: Northern Tool Equipment Each pump operates off truck or equipment engines. Mounted in line with engine belt 2 groove pulley. 7in. pulley diameter. Takes two type A 1/2in. belts. Clockwise rotation. Foot mounts with two 1/2in. tapped holes. Maximum pressure 3000. 1 1/4 in. SAE inlet, 3/4 in. SAE outlet. | *$499.99 |
 | Hydraulic Clutch Pump Brand: Northern Tool Equipment Each pump operates off truck or equipment engines. Mounted in line with engine belt 2 groove pulley. 7in. pulley diameter. Takes two type A 1/2in. belts. Clockwise rotation. Foot mounts with two 1/2in. tapped holes. Maximum pressure 3000. #16 O-ring SAE inlet, #12 O-ring SAE outlet. | *$499.99 |
 | Hydraulic Cylinder Breather Cap - 1/2in. Dia. Brand: Northern Tool Equipment Converts double-acting cylinders to single action. 1/2 in. in size. | *$6.99 |
 | Hydraulic Fluid - 2.5 Gallons Brand: Northern Tool Equipment Mag1 lubricant anitwear rust oxidation hydraulic fluid, ISO 32. | *$17.99 |
 | Hydraulic Hose 1/2-INX120-IN Brand: Apache Hose Part Number: 98398336 Temperature range -40 to 200 farenheit; Working pressure 3500 lbs.; Coupled with solid male ends | *$24.66 |
 | Hydraulic Hose 1/2-INX144-IN Brand: Apache Hose Part Number: 98398342 Temperature range -40 to 200 farenheit; Working pressure 3500 lbs.; Coupled with solid male ends | *$29.96 |
 | Hydraulic Hose 1/2-INX24-IN Brand: Apache Hose Part Number: 98398306 Temperature range -40 to 200 farenheit; Working pressure 4000 lbs.; Coupled with solid male ends | *$9.61 |
 | Hydraulic Hose 1/2-INX36-IN Brand: Apache Hose Part Number: 98398312 Temperature range -40 to 200 farenheit; Working pressure 3500 lbs.; Coupled with solid male ends | *$11.31 |
 | Hydraulic Hose 1/2-INX48-IN Brand: Apache Hose Part Number: 98398318 Assemblies. 2 wire. Assemblies: Hose and couplings meet 100R2AT specification. 3/8" I.D.: 4000 P.S.I. (W.P.), 16,0000 P.S.I. burst, 5.12" minimum bend radius, coupled 3/8" MNPT on each end. 1/2" I.D.: 3500 P.S.I. (W.P.), 14,000 P.S.I. burst, 7.09" minimum bend radius, coupled 1/2" MNPT on each end. Temperature range: -40 F. to 212 F. (-40 celcius to 100 celcius) Packaged: Coiled, sleeved, and labeled with I.D., length, specifications, and UPC bar code. No. 98398220: 3/8" I.D. x 12" No. 98398226: 3/8" I.D. x 24" No. 98398232: 3/8" I.D. x 36" No. 98398238: 3/8" I.D. x 48" No. 98398241: 3/8" I.D. x 60" No. 98398244: 3/8" I.D. x 72" No. 98398250: 3/8" I.D. x 96" No. 98398256: 3/8" I.D. x 120" No. 98398300: 1/2" I.D. x 12" No. 98398306: 1/2" I.D. x 24" No. 98398312: 1/2" I.D. x 36" No. 98398318: 1/2" I.D. x 48" No. 98398321: 1/2" I.D. x 60" No. 98398324: 1/2" I.D. x 72" No. 98398327: 1/2" I.D. x 84" No. 98398330: 1/2" I.D. x 96" No. 98398336: 1/2" I.D. x 120" No. 98398339: 1/2" I.D. x 132" No. 98398342: 1/2" I.D. x 144" | *$14.03 |
 | Hydraulic Hose 1/2-INX96-IN Brand: Apache Hose Part Number: 98398330 Temperature range -40 to 200 farenheit; Working pressure 3500 lbs.; Coupled with solid male ends | *$19.13 |
 | Hydraulic Hose 3/8-INX24-IN Brand: Apache Hose Part Number: 98398226 Temperature range -40 to 200 farenheit; Working pressure 4000 lbs.; Coupled with solid male ends | *$8.72 |
 | Hydraulic Hose 3/8-INX36-IN Brand: Apache Hose Part Number: 98398232 Temperature range -40 to 200 farenheit; Working pressure 4000 lbs.; Coupled with solid male ends | *$9.51 |
 | Hydraulic Hose Fitting, 1/2" Brand: Gates Part Number: G251790810 Gates G25179-0810 MEGACRIMP COUPLI | *$11.69 |
 | Hydraulic Hose Fitting, 1/2" Brand: Gates Part Number: G251230810 Gates G25123-0810 MEGACRIMP COUPLI | *$13.02 |
 | Hydraulic Hose Fitting, 1/2" Brand: Gates Part Number: G252000808 Gates G25200-0808 MEGACRIMP COUPLI | *$8.36 |
 | Hydraulic Hose Fitting, 1/2" Brand: Gates Part Number: G251700806 Gates G25170-0806 MEGACRIMP COUPLI | *$5.78 |
 | Hydraulic Hose Fitting, 1/2" Brand: Gates Part Number: G252390808 Gates G25239-0808 MEGACRIMP COUPLI | *$10.08 |
 | Hydraulic Hose Fitting, 1/4" Brand: Gates Part Number: G252300404 Gates G25230-0404 MEGACRIMP COUPLI | *$3.39 |
 | Hydraulic Hose Fitting, 1/4" Brand: Gates Part Number: G251750404 Gates G25175-0404 MEGACRIMP COUPLI | *$7.67 |
 | Hydraulic Hose Fitting, 3/4" x 50' Brand: Gates Part Number: 86624 Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$7.50 |
 | Hydraulic Hose Fitting, 3/8" Brand: Gates Part Number: G252400606 Gates G25240-0606 MEGACRIMP COUPLI | *$9.79 |
 | Hydraulic Hose Fitting, 3/8" Brand: Gates Part Number: G251750608 Gates G25175-0608 MEGACRIMP COUPLI | *$9.44 |
 | Hydraulic Hose Fitting, 3/8" Brand: Gates Part Number: G252250606 Gates G25225-0606 MEGACRIMP COUPLI | *$4.36 |
 | Hydraulic Hose Fitting, 3/8" Brand: Gates Part Number: G251790608 Gates G25179-0608 MEGACRIMP COUPLI | *$15.70 |
 | Hydraulic Hose Fitting, 3/8" Brand: Gates Part Number: G251230606 Gates G25123-0606 MEGACRIMP COUPLI | *$10.66 |
 | Hydraulic Hose, 1" x 50' Brand: Gates Part Number: 86625 Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$9.00 |
 | Hydraulic Hose, 1/2" x 50' Brand: Gates Model: 86623 Part Number: 86623 Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$4.50 |
 | Hydraulic Hose, 1/4" x 50' Brand: Gates Part Number: 86621 Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$4.50 |
 | Hydraulic Hose, 5/8" x 50' Brand: Gates Model: 86626 Part Number: 86626 Recommended for high pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. | *$6.00 |
 | Hydraulic Knockout Punch Driver Kit Brand: Central Hydraulics Great for punching holes in steel, this punch driver features a hydraulic design that punches much faster than manual wrench-style punches. Kit includes a 10 ton pump and five of the most popular punches and dies. Pair with the 2-1/2" or 3" Knockout Punch And Die Sets (sold separately) to increase the tool's capacity.
Punch holes up to 2" diameter in 11 gauge mild and 16 gauge stainless steel
Compact design is easily portable to any job site
Quick and easy to use
Includes 10 ton pump with pressure hose, five punches and dies, 3/4" and 3/8" threaded studs, an adapter, and a carrying case. Die sizes (actual hole size x pipe diameter): 1.115" x 3/4"; 1.362" x 1"; 1-11/16" x 1-1/4 "; 1-15/16" x 1-1/2"; 2-3/8" x 2" | *$117.90 |
 | Hydraulic Knockout Set 1/2" To 4" w/Hand Pump (623-KOH540A) Category: Hydraulic Knockout Punches Brand: Gardner Bender Part Number: 623-KOH540A Item #: 623-KOH540A. Four point design allows slug to drop automatically without splittingbrCompetitors punches and dies are interchangeable pulliCutting Diameter = 1/2 in [Min], 4 in [Max]liCutting Thickness = 12 gauge (stainless steel) [Max], 10 gauge (mild steel) [Max]liThroat Includes = PH20 Hand Pump, (10) Punches 1/2 - 4 in, (10) Dies 1/2 - 4 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal CaseliWt. = 50 lb/ul brCustomers also search for: Discount Hydraulic Knockout Set 1/2" To 4" w/Hand Pump, Buy Hydraulic Knockout Set 1/2" To 4" w/Hand Pump, Wholesale Hydraulic Knockout Set 1/2" To 4" w/Hand Pump, 032076813635, KOH540A, Hydraulic Knockout Punches | *$1,682.88 |
 | Hydraulic Knockout Set 1/2"-2" w/Foot Pump (623-KOF520) Category: Hydraulic Knockout Punches Brand: Gardner Bender Part Number: 623-KOF520 Item #: 623-KOF520. Four point design allows slug to drop automatically without splittingbrCompetitors punches and dies are interchangeable pulliCutting Diameter = 1/2 in [Min], 2 in [Max]liCutting Thickness = 12 gauge (stainless steel) [Max], 10 gauge (mild steel) [Max]liThroat Includes = PF65 Foot Pump, (6) Punches 1/2 - 2 in, (6) Dies 1/2 - 2 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal CaseliWt. = 40 lb/ul brCustomers also search for: Discount Hydraulic Knockout Set 1/2"-2" w/Foot Pump, Buy Hydraulic Knockout Set 1/2"-2" w/Foot Pump, Wholesale Hydraulic Knockout Set 1/2"-2" w/Foot Pump, 032076813598, KOF520, Hydraulic Knockout Punches | *$1,474.21 |
 | Hydraulic Pump Mounting Bracket Brand: Northern Tool Equipment With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. U.S.A. Bracket Length (in.): 5, Bolt Circle (in.): 3 5/8, Mounting Type: 4 bolt | *$29.99 |
 | Hydraulic Pump Mounting Bracket Brand: Northern Tool Equipment With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. Bracket Length (in.): 6, Bolt Circle (in.): 7 3/4 | *$64.99 |
 | Hydraulic Pump Mounting Bracket Brand: Northern Tool Equipment With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 2-bolt brackets for J.S. Barnes 22 and 28 GPM pumps. Fit our items 1057 and 1058 pumps. | *$59.99 |
 | Hydraulic Pump Mounting Bracket Brand: Northern Tool Equipment With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. U.S.A. Bracket Length (in.): 5 5/8, Bolt Circle (in.): 6 1/2, Mounting Type: 4 bolt | *$54.99 |
 | Hydraulic Pump Mounting Bracket Brand: Northern Tool Equipment With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 2-bolt brackets for J.S. Barnes 22 and 28 GPM pumps. Fit our items 1057 and 1058 pumps. | *$64.99 |
|