 | Bekaert Corp 32"X330' Gaucho Fence Class 3 118406
Brand: Bekaert Part Number: 118406
Combines the hinge joint knot with high tensile steel. Strong and installs fast. Reduced sagging and less maintenance. 14 gauge filler wire fence has 12-1/2 gauge top and bottom wires. 12.5 gauge has a 10.5 gauge top and bottom wires. Class III galvanizat ion. Meets or exceeds ASTM 116-05. | *$139.32 |
| Bekaert Corp 39"X330' Gaucho Fence Class 3 118188
Brand: Bekaert Part Number: 118188
Combines the hinge joint knot with high tensile steel. Strong and installs fast. Reduced sagging and less maintenance. 14 gauge filler wire fence has 12-1/2 gauge top and bottom wires. 12.5 gauge has a 10.5 gauge top and bottom wires. Class III galvanizat ion. Meets or exceeds ASTM 116-05. | *$227.19 |
 | Bekaert Corp 47"X330' Gaucho Fence Class 3 118155
Brand: Bekaert Part Number: 118155
Combines the hinge joint knot with high tensile steel. Strong and installs fast. Reduced sagging and less maintenance. 14 gauge filler wire fence has 12-1/2 gauge top and bottom wires. 12.5 gauge has a 10.5 gauge top and bottom wires. Class III galvanizat ion. Meets or exceeds ASTM 116-05. | *$230.03 |
 | Bekaert Corp 47"X330' Gaucho Fence Class 3 118202
Brand: Bekaert Part Number: 118202
Combines the hinge joint knot with high tensile steel. Strong and installs fast. Reduced sagging and less maintenance. 14 gauge filler wire fence has 12-1/2 gauge top and bottom wires. 12.5 gauge has a 10.5 gauge top and bottom wires. Class III galvanizat ion. Meets or exceeds ASTM 116-05. | *$258.98 |
 | Bg/10: Speeco Hitch Pin Clip (P7922ZJU)
Brand: Special Speeco Products Model: P7922ZJU Part Number: P7922ZJU
Sold as Bg/10. Gold dichromate plating. Bulk. Fits Hitch Pins 1/4"-3/8" Dia. 1/16" Wire . Manufacturer number: P7922ZJU. SKU #: 7035694. Country of origin: India. Distributed by Special Speeco Products. | *$6.99 |
 | Bg/25: Dare T-Post Vinyl Safety Cap (2927-25)
Brand: Dare Products, Inc Model: 2927-25 Part Number: 2927-25
Sold as Bg/25. Provides attractive top to standard size T-posts. Protects from sharp jagged edges. Use at home, farm, or construction sites. White. 25 per bag. Manufacturer number: 2927-25. SKU #: 7195720. Country of origin: (TBA). Distributed by Dare Products, Inc. | *$8.98 |
| | Big Orange Hitch Pins With Hairpin Lock - HITCH PIN 1" x 6-3/4"L.
Brand: CM Chain Part Number: 1230
Big Orange Hitch Pins With Hairpin Lock - Hot forged of high-strength steel; hardened and tempered for maximum strength; will not break or bend. Complete with hairpin lock. Painted orange. Carton pac | *$20.85 |
 | Big Orange Hitch Pins With Hairpin Lock - HITCH PIN 3/4" x 6-1/4"L.
Brand: CM Chain Part Number: 1220
Big Orange Hitch Pins With Hairpin Lock - Hot forged of high-strength steel; hardened and tempered for maximum strength; will not break or bend. Complete with hairpin lock. Painted orange. Carton pac | *$17.41 |
| | Big Orange Hitch Pins With Hairpin Lock - HITCH PIN 7/8" x 6-1/2"L.
Brand: CM Chain Part Number: 1225
Big Orange Hitch Pins With Hairpin Lock - Hot forged of high-strength steel; hardened and tempered for maximum strength; will not break or bend. Complete with hairpin lock. Painted orange. Carton pac | *$27.84 |
 | Blkwidow Insltor Wdpt 25/Pkg
Brand: DARE Part Number: BW-WP-25(500
High density black linear polyethylene for sunlight resistance. Operates well in any climate, in any part of the world. 45 degree slot easily accepts any fence wire and holds it is place. Black only 25 to a package 20 packages to a case. | *$3.46 |
 | Blue Polywire for Electric Fence - Bluefor
Brand: LACME
BLEUFOR All purpose Polywire. This poly wire uses 2 large diameter galvanized steel wires located on the outside of the filament for full exposure and contact with the wire. Highly resistant to sparking and frequent handling. The two wires have an extra heavy galvanized coating of 120 g/m2. Extra flexible multi strand around a central core of polyethylene makes this product flexible while retaining its strength. It can be used for permanent or temporary fencing. | *$15.00 |
 | Blue Polywire for Electric Fence - Extrafor
Brand: LACME
EXTRAFOR All purpose Polywire. This poly wire uses 2 large diameter galvanized steel wires located on the outside of the filament for full exposure and contact with the wire. This is a highly visible wire because of its thickness and exeptional brightness. Highly dependable polywire. Highly resistant to sparking and frequent handling. The two wires have an extra heavy galvanized coating of 120 g/m2. Extra flexible multi strand around a central core of polyethylene makes this product flexible while retaining its strength. It can be used for permanent or temporary fencing. | *$10.00 |
 | Blue/Green Electric Fence Polywire - 820'- 9 Wires
Brand: Field Model: 631785 Part Number: 631785
This Blue/Green polywire has 9 wires. This Polywire is for permanent or temporary installations.
It is recommended for wildlife control. Optimally designed for large diameter metal and plastic wires It has excellent resistance to handling and sparking damages. It is suitable for even very high energizers and recommended for difficult conditions such as dry ground, hard to manage animals, deer etc. It comes in rolls of 820 feet and weighs 4.0 lbs per roll. | *$35.00 |
 | Bolt Hook, 3/4" x 12"
Brand: Behlen Model: 40300029 Part Number: 40300029
"BEHLEN/FARMASTER " 3/4X12 BOLT HOOK
Zinc-plated to resist corrosion.
For 2" gates.
3/4" x 12" size
Bolt hook. | *$10.77 |
| Bolt Hook, 5/8" x 12"
Brand: Behlen Part Number: 42900038 | *$11.52 |
 | Bon Tool Co. Post Hole Digging Tamping Bar
Brand: Bon Part Number: 27-200 | *$45.46 |
 | Braber Equipment General-Purpose PTO Shaft Assembly - 28in. Compressed Length, Model# 69.777.049
Brand: Braber Equipment
Complete driveline is economical and easy to install, so you don't have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. | *$79.99 |
 | BRACE PIN 10IN 5/BG 50
Brand: Zareba Part Number: GBP10
Attaches horizontal brace post to upright brace posts. Use in vertical brace post corner and brace assemblies. | *$9.88 |
 | BRAIDED MEGA WIRE ORNG ) 12
Brand: TWIN MOUNTAIN FENCE D Part Number: MW200
Plastic Temporary fencing insulator for tape and rope and wire. Insulator for wide tape. | *$51.39 |
 | Brave Grapple for 3-Pt. Tractor Hitch, Model# SB-O3
Brand: Brave
Use with tractors in 20-60 HP range. Fits category 1, 2, and 3 tractor hitches. Lifts up to 2000 lbs. Opens to 55in. (inside) and handles logs up to 3-ft. dia. Grapple locks at 90deg for side loading. U.S.A. Hitch Type: 3-Point, Category Type: 1, 2, 3, Required HP: 20 - 60, Capacity (lbs.): 2,000 | *$3,299.99 |
 | Brave Grapple for Skid Steer Loader, Model# SL-O3
Brand: Brave
Use with loaders in 30-60 HP range. Lifts up to 2000 lbs. Opens to 55in. (inside) and handles logs up to 3-ft. dia. Grapple locks at 90deg for side loading. Universal mounting plate to fit all skid steer loaders. Pivots up to 135#176; in either direction. U.S.A. | *$3,599.99 |
 | Brune Farm Inc. POST Steel Post Driver
Brand: Brune Farm Inc. Part Number: POST
A 1 man proposition. 1 man may drive between 200 to 300 posts a day without strain. No holes to dig. Weighted driver is placed over head of post and worked up and down like a pile driver. Inside diameter 2 1 2". 17 lb. | *$29.99 |
 | Bulb Planter And Auger
Brand: Lewis Standard Tool Part Number: RT-1
Roto planter digs holes for bulb planting, tree aeration, electrical wiring, or to install irrigation pipe or PVC. For use in a 3/8" or larger electric or cordless drill. Bulb planter drills holes up to 7" deep and 1-3/4" in diameter | *$10.99 |
 | C M Chain Fence Wire Stretcher 12365
Brand: Columbus McKinnon Model: 12365 Part Number: 12365
Barbed wire or fence handle. Used for stretching, repairing barbed wire or smooth wire, post to post, tree to tree. Hardened steel wire grip with swivel. Accommodates 8'' gauge wire or similar. Fast one man operation. | *$46.47 |
 | C.R. LAURENCE 0377005 CRL Panther Edger Replacement Spindle Bearing
Brand: C.R. Laurence Part Number: 0377005
C.R. LAURENCE 0377005 CRL Panther Edger Replacement Spindle Bearing. This high quality CRL Panther Edger Replacement Spindle Bearing is used on the CRL Panther Edger to support the main spindle when in operation. Replacement can be accomplished by a qualified mechanic. Bearings are normally replaced as a set but are sold individually.. | *$55.11 |
 | C.R. LAURENCE 0377006 CRL Panther Edger Front Oil Seal
Brand: C.R. Laurence Part Number: 0377006
C.R. LAURENCE 0377006 CRL Panther Edger Front Oil Seal. This CRL Panther Edger Front Oil Seal is used with the CRL Panther Glass Edger. It keeps out contaminants such as dirt and water from the spindle shaft. Replacing this seal should be done by a qualified person who has previous experience with repairing machinery.. | *$22.98 |
 | C.R. LAURENCE 0377007 CRL Panther Edger V-Ring Shaft Seal
Brand: C.R. Laurence Part Number: 0377007
C.R. LAURENCE 0377007 CRL Panther Edger V-Ring Shaft Seal. This CRL Panther Edger V-Ring Shaft Seal is used with the Panther Glass Edger. It keeps the shaft and bearing lubricants in and contaminants such as dirt and water out. Replacing this seal should be done by a qualified person who has previous experience with repairing machinery.. | *$48.95 |
 | C.R. LAURENCE 0377008 CRL Panther Edger Shaft for Spindle
Brand: C.R. Laurence Part Number: 0377008
C.R. LAURENCE 0377008 CRL Panther Edger Shaft for Spindle. This CRL Shaft for Panther Edger Spindle is used with the Panther Glass Edger. Replacing this item should be done by a qualified person who has previous experience with repairing machinery.. | *$306.93 |
 | C.R. LAURENCE 0377028 CRL Panther Edger Replacement Drive Belt
Brand: C.R. Laurence Part Number: 0377028
C.R. LAURENCE 0377028 CRL Panther Edger Replacement Drive Belt. This CRL Replacement Drive Belt is used on all original belt driven Panther Glass Edgers. Over time these belts stretch and wear, and need replacing. Should be replaced during a major machine overhaul. Its two inch (51 millimeter) width is standard.. | *$190.50 |
 | C.R. LAURENCE 0377032 CRL Panther Edger Idler Gear
Brand: C.R. Laurence Part Number: 0377032
C.R. LAURENCE 0377032 CRL Panther Edger Idler Gear. This CRL Idler Gear is used for guiding the drive belt and to make it track correctly, by keeping the proper tension. Gear is made from rolled steel and rides on a bearing. Used on the CRL Panther Edger.. | *$185.62 |
 | C.R. LAURENCE 0377034 CRL Panther Edger Brass Nut
Brand: C.R. Laurence Part Number: 0377034
C.R. LAURENCE 0377034 CRL Panther Edger Brass Nut. This heavy CRL Brass Nut secures the diamond wheel and polishing wheel to the Panther Glass Edger. The solid brass material resists corrosion, preventing it from becoming "frozen" onto the spindle shaft. Always use the correct wrench to tighten to avoid stripping.. | *$76.93 |
 | C.R. LAURENCE 0377036 CRL Panther Edger Height Adjustment Handle
Brand: C.R. Laurence Part Number: 0377036
C.R. LAURENCE 0377036 CRL Panther Edger Height Adjustment Handle. This CRL Height Adjustment Handle raises and lowers the diamond wheel on the CRL Panther Edger. The black plastic knob with brass shaft easily attaches to the height adjustment linkage.. | *$56.78 |
 | C.R. LAURENCE 0377111 CRL Panther Edger 110 Volt Coolant Pump
Brand: C.R. Laurence Part Number: 0377111
C.R. LAURENCE 0377111 CRL Panther Edger 110 Volt Coolant Pump. This high quality pump was designed for use with the CRL Panther Edger. It delivers Coolant to the Grinding Wheel and at the same time it lubricates the surrounding machine parts. The pump sits in the tank and usually works best if it is suspended from the bottom, as it will not be as prone to contaminants. Periodic cleaning of the sediment screen will prolong the life of the pump. NOTE: 110 Volt model not available in Australia.. | *$160.54 |
| | C.R. LAURENCE 0377729 CRL Panther Edger Back Support Roller Bar
Brand: C.R. Laurence Part Number: 0377729
C.R. LAURENCE 0377729 CRL Panther Edger Back Support Roller Bar. The CRL Panther Edger Back Support Roller Bar can be used as an additional support for your CRL Panther Edger or can be used in conjunction with the CRL Panther Height Extension Kit. Wheels are adjustable for spacing and removable if necessary.. | *$71.20 |
 | C.R. LAURENCE 3LTRT CRL Universal "One-Man" Movable Glass Table
Brand: C.R. Laurence Part Number: 3LTRT
C.R. LAURENCE 3LTRT CRL Universal "One-Man" Movable Glass Table. One person can sand large pieces of glass without having to support the glass" weight by using this CRL Universal "One-Man" Movable Glass Table. It rolls on a support rail in front of the sander, so the operator controls the amount of pressure the glass applies to the belt. The table top is carpeted, and has four pop-up ball casters, allowing easy glass rotation. All sides can then be sanded without having to lift the glass. The legs are adjustable to allow use with any upright belt sander. Table Guide Rail is 156 inches (3,962 millimeters) long; Table Top is 36 by 60 inches (914 by 1,524 millimeters).. | *$2,221.84 |
 | C.R. LAURENCE 6105GL CRL One Gallon Glas-Grind
Brand: C.R. Laurence Part Number: 6105GL
C.R. LAURENCE 6105GL CRL One Gallon Glas-Grind. CRL Glas-Grind Coolant was developed to provide excellent results for edging, beveling, drilling, sawing and other abrasive work on glass. Specifically designed for the glass industry. GlassGrind will not harden in the bottom of tanks like other coolants.. | *$241.78 |
 | C.R. LAURENCE AFCB1 CRL Air Float Chamber With Ball for Cutting Tables
Brand: C.R. Laurence Part Number: AFCB1
C.R. LAURENCE AFCB1 CRL Air Float Chamber With Ball for Cutting Tables. Replace your worn or damaged ball float units on your cutting table with the CRL Air Float Chamber with Ball. This unit is an OEM part for all CRL air flotation systems.. | *$76.65 |
 | C.R. LAURENCE BC1NPT84X156 CRL 84" x 156" Ball Caster Inspection Table
Brand: C.R. Laurence Part Number: BC1NPT84X156
C.R. LAURENCE BC1NPT84X156 CRL 84" x 156" Ball Caster Inspection Table. This CRL Ball Caster Inspection Table is placed at the egress end of the glass washer to inspect clean lites of glass for I.G. units. It has the same heavy steel construction as our Ball Caster Transfer Table with the exception of a two by three foot (61 by 91 centimeter) cutout centered on one long side of the table for ease of handling, inspecting and transferring of the glass.. | *$2,527.36 |
 | C.R. LAURENCE BW14 CRL 14" x 5/8" Replacement Grinding Wheel
Brand: C.R. Laurence Part Number: BW14
C.R. LAURENCE BW14 CRL 14" x 5/8" Replacement Grinding Wheel. The CRL Finger Pull Machine uses this Replacement Grinding Wheel for cutting grooves in glass. Easily replaced with simple hand tools. Can be used on either the FP1 or the old style FP514 Finger Pull Machine.. | *$175.64 |
 | C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0004
C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander. This CRL 115 Volt Solenoid is designed to fit the GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$239.50 |
 | C.R. LAURENCE CN0006 CRL Water Spray Valve for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0006
C.R. LAURENCE CN0006 CRL Water Spray Valve for the GL4W or CN4106 Sander. This CRL Spray Valve is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part for older or clogged valves.. | *$33.17 |
 | C.R. LAURENCE CN0012 CRL 115 Volt Motor for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0012
C.R. LAURENCE CN0012 CRL 115 Volt Motor for the GL4W or CN4106 Sander. This CRL 115 Volt Motor is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. The heavy-duty, 1 HP motor runs at 3450 RPM and can be wired for 230 Volts by a qualified electrician. It carries a one year warranty.. | *$569.93 |
 | C.R. LAURENCE CN0017 CRL Top Wheel Bracket for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0017
C.R. LAURENCE CN0017 CRL Top Wheel Bracket for the GL4W or CN4106 Sander. This CRL Top Wheel Bracket is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$216.34 |
 | C.R. LAURENCE CN0025 CRL 3" Front Rest Roller for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0025
C.R. LAURENCE CN0025 CRL 3" Front Rest Roller for the GL4W or CN4106 Sander. This CRL 3" Front Rest Roller is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$21.88 |
 | C.R. LAURENCE CN0026 CRL Front Rest Roller Axle for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0026
C.R. LAURENCE CN0026 CRL Front Rest Roller Axle for the GL4W or CN4106 Sander. This CRL Front Rest Roller Axle is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$17.69 |
 | C.R. LAURENCE CN0027 CRL Front Rest Roller Bar for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0027
C.R. LAURENCE CN0027 CRL Front Rest Roller Bar for the GL4W or CN4106 Sander. This CRL Front Rest Roller Bar is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$54.92 |
 | C.R. LAURENCE CN0034 CRL Upper Pulley With Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0034
C.R. LAURENCE CN0034 CRL Upper Pulley With Bearing for the GL4W or CN4106 Sander. This CRL Upper Pulley with Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. The 5-1/4 inch (133 millimeter) steel pulley comes complete with bearing. It can easily be replaced with common hand tools.. | *$260.63 |
 | C.R. LAURENCE CN0035 CRL Top Pulley Shaft and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0035
C.R. LAURENCE CN0035 CRL Top Pulley Shaft and Bearing for the GL4W or CN4106 Sander. This CRL Top Pulley Shaft and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$111.50 |
 | C.R. LAURENCE CN0036 CRL Roller Platen for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0036
C.R. LAURENCE CN0036 CRL Roller Platen for the GL4W or CN4106 Sander. This CRL Roller Platen is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$476.14 |
 | C.R. LAURENCE CN0037 CRL Roller Platen Shaft Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0037
C.R. LAURENCE CN0037 CRL Roller Platen Shaft Bearing for the GL4W or CN4106 Sander. This CRL Roller Platen Shaft Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools.. | *$108.76 |
