 | Farm Star Equipment Rotary Tiller - 3-Point, Category 1, 66in. Length
Brand: Farm Star Equipment
Tillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in.-6in. maximum. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 66, Working Depth (in.): 5 - 6, Max. HP: 40, Required HP: 35 - 40, Offset (in.): 7 1/2, Blades (qty.): 32, Blade Type: L Shaped | *$1,999.99 |
 | Farm Star Equipment Skid Steer (Grapple Rake) - 62in. Width
Brand: Farm Star Equipment
Grapple rake features unique tine design with replaceable weld on tine points which allow operator to go under logs and brush to completely pick up debris while leaving dirt. Fits all skid steers with universal quick-tach system. Durable design with good visibility is quick and easy to install; some assembly required. Truck ship. U.S.A. | *$2,699.99 |
 | Farmex/Speeco Pto Lock Pin Assembly 01090
Brand: SpeeCo Model: 01090 Part Number: 01090
Includes pin and spring. Zinc plated. | *$4.84 |
 | Fence Controller - FENCE CONTROLLER
Brand: Red Snap'r Part Number: 66B
Fence Controller - *Charges up to 15 miles on a properly installed fence. *Produces an uncomfortable shock if touched by people, livestock or pets. *Operates on 110V. 60 hz. | *$57.00 |
 | Fence Pliers, Bulk - 10-1/2 Inch
Brand: Michigan Industrial Tools Part Number: 93566
Drop forged heat treated steel construction. precision-machined channel and jaw. Cushioned full-length non-slip handle grips, 7 pliers in one: two wire splicing channels, milled hammer face, staple puller claw, twin wire cutters, and a gripping jaw. | *$10.40 |
 | Fence Splices
Brand: New Farm Products Part Number: LBW1
Joins, mends, repairs all fence wire easily. For a secure and permanent rust resistant connection. No.GB5 - For 15-1/2 gauge hi-tensile ``Gaucho" barbed wire. Nos.LBW1 and LBW5 - For 12-1/2 gauge barbed, 9 gauge smooth wire. No.SS5 - For 12-1/2 gauge hi-tensile smooth, woven fence. No.ST5 - For 12-1/2 gauge hi-tensile smooth, woven fence. Stainless steel. No.WW5 - For 10-16 gauge smooth, electric, woven fence. | *$20.79 |
 | Fence Stretcher Splicer - 12372 Wire Fence Stretcher
Brand: Columbus McKinnon Part Number: 12372
FENCE STRETCHER SPLICER - Stops rivet both sides ~ Keeps ratchet on bar ~ Weighs 8-7/8 lbs. ~ 1 000 lb. work load limit | *$41.56 |
 | Flexpoint 3 Point Hitch Adapter for Category 2 and 3 Tractors
Brand: Flexpoint
Fits larger 50 HP tractors and also has the capability to tow gooseneck trailers. For use with category 2 and 3 tractors. U.S.A. | *$299.99 |
 | Gallagher Power Plus M150 110v
Brand: Gallagher Model: G328504 Part Number: G328504
Gallagher 110 volt energizer has the ability to power up to 60 acres or 11 miles of multi-wire permanent fence. All Gallagher Power Fence Energizers carry a 2-year warranty, including lightning damage. In addition, each carries a 30-day, money-back, customer-satisfaction guarantee | *$111.00 |
 | Galv Chain Link Fence gate 3x3
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 3x4
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 3x5
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 3x6
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 4x3
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 4x4
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 4x5
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 4x6
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 5x3
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 5x4
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 5x5
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 5x6
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 6x3
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 6x4
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 6x5
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence gate 6x6
Brand: Fence-Material | *Too low to display |
 | Galv Chain Link Fence Post 2" x 6ft
Brand: Fence-Material | *Too low to display |
 | Galv Chain Link Fence Post 2" x 7ft
Brand: Fence-Material | *Too low to display |
| Galv Chain Link Fence Post 2" x 8ft
Brand: Fence-Material | *Too low to display |
 | Galvanized Cage Wire - 24In. X25ft. 1X2x14 Galv Cage Wire
Brand: Mazel Part Number: 8010252412
MAZEL CO. 8010252412 24X25 CAGE WIRE | *$22.77 |
 | Garden Auger Bulb Planter for Soil and Earth Heavy Duty 2" diameter
Brand: Garden Auger Model: 2x24HD Part Number: 2x24HD
The 2" diameter Heavy Duty Garden Auger by Custom Auger Systems is the perfect planting auger for smaller bulbs like the crocus or miniature dahlia and gladiolus. Also an excellent tool for drilling pilot holes for tree and fertilizer stakes, and installing termite bait stations.
Features a hardened knife-like cutter blade that slices through harder ground and clay. Designed with three flats on the end of the shaft to keep the auger from slipping in your drill chuck.
Fits household drills 3/8" diameter and larger. Any corded drill provides plenty of power; if using a cordless drill, 18 volts are recommended. | *$35.99 |
 | Gate Anchor, 1 3/4" to 2"
Brand: Worens Group Model: 16100200 Part Number: 16100200
Holds livestock gate open in any position. Fits round tube gates 1-3/4" to 2" O.D. Helps prevent gate end swinging and sagging. | *$15.99 |
 | Gate Handles - GATE HANDLES
Brand: Red Snap'r Part Number: PG10
Gate Handles - *Made from first quality raw materials, fired in modern tunnel kilns with automatic temperature control, thus assuring uniform high quality. *Packed in quick selling retail carton. | *$1.94 |
 | Gate Hinge, 2"
Brand: SpeeCo Model: 16100900 Part Number: 16100900
Kit includes upper and lower hinges and mounting hardware. | *$19.26 |
| | General 200 Series Hole Diggers: OD - Digging Depth: 15"
Brand: General Equipment Part Number: 2135-15X
200 Series Hole Diggers: Augers - Digging Depth: 15" | *$71.95 |
| | General 200 Series Hole Diggers: OD-4" Cutting Dia: 5. 2" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-4E
200 Series Hole Diggers: Augers-4" Cutting Dia: 5. 2" Digging Depth: 30" | *$102.95 |
| | General 200 Series Hole Diggers: OD-6" Cutting Dia: 7. 5" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-6E
200 Series Hole Diggers: Augers-6" Cutting Dia: 7. 5" Digging Depth: 30" | *$107.95 |
| | General 200 Series Hole Diggers: OD-8" Cutting Dia: 9. 2" Digging Depth: 30"
Brand: General Equipment Part Number: 2135-8E
200 Series Hole Diggers: Augers-8" Cutting Dia: 9. 2" Digging Depth: 30" | *$112.95 |
 | General 300 Series Hole Diggers: 5 HP Honda GXV140 engine. 190 ft lbs drilling torque
Brand: General Equipment Part Number: M330H
M330H Professional Series Hole Digger, equipped with 5 HP Honda GXV140 engine. Base unit, two man operation. Powered by an industrial quality four cycle engine, automatic centrifugal clutch directly connected by engine speed, approximately 190 ft lbs drilling torque, 1-3/8 inch hexagon drive shaft connection. Less auger. For use with the 4400 Series augers and 5500 Series auger extensions only. | *$1,591.95 |
 | General 300 Series Hole Diggers: 5.5 HP Honda® GXV160, 7/8 inch square type connection
Brand: General Equipment Part Number: M357H
5.5 HP Honda® GXV160, Stihl type auger connection. For use with the General BT360 Series earth augers and appropriate Stihl earth augers only. | *$1,591.95 |
| | General 300 Series Hole Diggers: 5.5 HP Honda® GXV160, 7/8 inch square type connection
Brand: General Equipment Part Number: M343H
5.5 HP Honda® GXV160, 7/8 inch square type connection. For use with the General PSD, and Ground Hog CSD, SD and PSD Series earth augers only. | *$1,591.95 |
| | General 300 Series Hole Diggers: OD: 12". Cutting Dia; 13. 6" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-12E3
300 Series Hole Diggers: OD: 12". Cutting Dia; 13. 6" Digging Depth: 3' | *$242.95 |
| | General 300 Series Hole Diggers: OD: 12". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-12X3
300 Series Hole Diggers: OD: 12". Cutting Dia; NA Digging Depth: 3' | *$199.95 |
| | General 300 Series Hole Diggers: OD: 16". Cutting Dia; 17. 2" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-16E3
300 Series Hole Diggers: OD: 16". Cutting Dia; 17. 2" Digging Depth: 3' | *$498.95 |
| | General 300 Series Hole Diggers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-4E3
300 Series Hole Diggers: OD: 4". Cutting Dia; 4. 5" Digging Depth: 3' | *$190.00 |
| | General 300 Series Hole Diggers: OD: 4". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-4X3
300 Series Hole Diggers: OD: 4". Cutting Dia; NA Digging Depth: 3' | *$161.95 |
| | General 300 Series Hole Diggers: OD: 6". Cutting Dia; 7. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-6E3
300 Series Hole Diggers: OD: 6". Cutting Dia; 7. 5" Digging Depth: 3' | *$204.95 |
| | General 300 Series Hole Diggers: OD: 8". Cutting Dia; 7. 5" Digging Depth: 3'
Brand: General Equipment Part Number: 4400-8E3
300 Series Hole Diggers: OD: 8". Cutting Dia; 7. 5" Digging Depth: 3' | *$218.95 |
| | General 300 Series Hole Diggers: OD: 8". Cutting Dia; NA Digging Depth: 3'
Brand: General Equipment Part Number: 5500-8X3
300 Series Hole Diggers: OD: 8". Cutting Dia; NA Digging Depth: 3' | *$171.00 |
 | General 660 DIG-R-MOBILE equipped with 13 HP Honda GX390 gasoline engine.
Brand: General Equipment Part Number: M660H
660 DIG-R-Mobile, base unit, one man operation, single axle towable configuration. Equipped with the following standard features: Powered by an industrial quality four cycle gasoline engine as depicted below. High speed, 4. 80 x 12 tries and demountable wheels with separate hubs. Towbar complete with quick attach pins, safety tow chains and 1-7/8 to 2 inch diameter Croft type adjustable ball hitch coupler. Eight GPM hydraulic pump with third hydraulic hose line return to reservoir for pump protection, 5 US gallon capacity oil reservoir with integral suction strainer, 10 micron return line filter and vandal resistant, lockable oil level dipstick. Low speed, high torque hydraulic motor, 144 RPM no load rotation speed, 276 ft lbs maximum drilling torque at 2000 PSI pressure setting. Exclusive Snap-Lok Auger Storage System to ease maneuvering on the job site. Hydraulic control valve with spring return (forward or reverse auger direction) operator control lever. Remote engine ignition ON/OFF switch. Hydraulic Tool Manufacturers Association (HTMA) type, flush mount/no drip, quickhose couplers to facilitate the use of popular types of hydraulic tools designed to operate on the standard HTM Class II flow (8 GPM flow rate and 2000 PSI pressure setting). | *$5,011.95 |
 | General 671 DIG-R-TACH, SERIES 16: 1330 ft lbs drilling torque @ 2500 PSI hydraulic
Brand: General Equipment Part Number: M671-16
671 DIG-R-TACH, SERIES 16, base drive unit. Used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. Two inch hexagon drive shaft connection, 1330 ft lbs drilling torque @ 2500 PSI hydraulic system pressure, stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source. For use with 6710 Series earth augers and 6700 Series auger extensions. | *$1,591.95 |
